BSP230,135

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The field-effect transistor (FET) is a type of transistor that can be used for a wide range of applications. The BSP230,135 is a high-power N-channel MOSFET (Metal Oxide Semiconductor Field Effect Transistor), which is one of the most common type of FET used in electronic circuits. The BSP 230,135 can be used to control large currents in industrial, automotive and consumer electronics applications.

In general, FETs are voltage-controlled devices with three terminals: the gate, the source, and the drain. The BSP 230,135 has a drain-source breakdown voltage rating of 230V, and a maximum current rating of 135A. The gate terminal requires a voltage of 10V in order to switch on the device.

When the gate voltage is below 10V, no current will flow through the BSP 230,135. This is because the device is in its OFF-state, and electrons are not able to pass through the device. Once the gate voltage reaches 10V, or higher, the device is in its ON-state, and electrons are able to flow through the drains and sources, allowing a current to flow. This is known as the “threshold voltage”, and is critical for the proper operation of the device.

The BSP 230,135 is most commonly used as a power switch in a wide range of applications. It can be used to switch high-voltages and high-currents, as well as low-voltage and low-currents. It also has a low voltage drop across the device, meaning that it has high efficiency and requires less power to operate.

In industrial and automotive applications, the BSP 230,135 can be used to switch high-currents, such as in high-power DC motors, solenoids, and other power-hungry devices. It is also used as a switch for low-voltage/low-current circuits, such as in switching logic, security systems, and other low-power circuits.

In consumer electronics, the BSP 230,135 can be used to switch LED’s and LCD’s, as well as amplifier circuits and motor control circuits. It is also used in surge protection circuits, programmable logic controllers, and in power management systems.

The working principle of the BSP 230,135 is simple an straightforward. When the gate voltage is below 10V, the device is in its OFF-state, and no current flows through the drains and sources. When the gate voltage reaches 10V, or higher, the device is in its ON-state, and electrons are able to pass through the device, allowing a current to flow.

The BSP 230,135 is a versatile and powerful FET, which can be used in a wide range of applications. Its ability to switch high-voltages and high-currents, as well as low-voltage and low-currents, make it a great choice for both industrial and consumer electronic applications.

The specific data is subject to PDF, and the above content is for reference