DTD113ECHZGT116 Discrete Semiconductor Products

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The DTD113ECHZGT116 single pre-biased transistor is an NPN device ideal for use in many applications such as amplifiers and switches, as well as in complex imaginary projects. The transistor is commonly used in Switch-Mode Power Supplies (SMPS), and is available in a variety of packages for a variety of circuit configurations. This article will discuss the DTD113ECHZGT116 application field and outline the working principles of this versatile semiconductor.

The DTD113ECHZGT116 is a NPN transistor with a Vceo rating of 11V, Ic of 0.2A, and Hfe of 200-250. It is also equipped with an integrated base-emitter resistor, which ensures the transistor is able to operate with a minimum current of 50mA. The transistor can be used in a variety of circuit configurations, including, but not limited to, long and short emitter followers, Class B amplifiers, and emitter-coupled circuits.

In an emitter follower circuit, a voltage is applied to the base of the transistor, which causes a current to flow through the transistor. This current is then amplified in the transistor and a proportion of this amplified current flows from the emitter terminal. The voltage of the output terminal is equal to the voltage of the base terminal minus the saturation voltage of the transistor. This type of circuit is useful for applications that require a low-impedance output amplifier, such as audio amplifiers and communication receivers.

In a Class B amplifier, the operating point of the transistor is biased so that a minimal current flows through it. This bias reduces the gain of the amplifier and allows the input signal to control the output of the amplifier. This type of configuration is commonly used in frequency-dependent audio amplifiers, as it allows the frequency response to be tailored using the bias voltage of the transistor.

When used in an emitter-coupled configuration, the base-emitter terminals of the DTD113ECHZGT116 transistor are connected in series to increase the gain and reduce the impedance of the output amplifier. The output voltage of this type of amplifier is directly proportional to the input voltage, with the gain being dependent on the value of the load resistance. This type of configuration is commonly used in a variety of circuits, such as automotive stereos and low-power audio amplifiers.

In addition to the many applications mentioned above, the DTD113ECHZGT116 transistor can also be used in a number of other circuits such as switch-mode power supplies (SMPS), control devices, and laser diodes. As the DTD113ECHZGT116 is suitable for use in a variety of circuit configurations and has a variety of packages available, it is an ideal choice for many different application fields.

To summarize, the DTD113ECHZGT116 single pre-biased transistor is an NPN device ideal for use in many applications, such as amplifiers, switches, and switch-mode power supplies. It is equipped with an integrated base-emitter resistor, which ensures the transistor is able to operate with a minimum current of 50mA. The device can be used in a wide range of circuit configurations, including, but not limited to, long and short emitter followers, Class B amplifiers, emitter-coupled circuits, and SMPS control devices. With its versatile applications and a variety of packages available, the DTD113ECHZGT116 is well suited for use in many different application fields.

The specific data is subject to PDF, and the above content is for reference