HAT 500-S

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Current transducers, including HAT 500-S, are electrical devices used to measure the electrical current in a circuit. They measure current by sensing the voltage drop across a precision resistor and converting the voltage into a usable signal. The HAT 500-S current transducer is a cost effective, low power, and miniature solution for electro-magnetic environments with a wide variety of applications in industrial and commercial facilities.

As a shunt resistor based current transducer, the HAT 500-S measures the output current when connected in series with the circuit. It uses a built-in precision resistor to measure the total current flowing through the circuit. The HAT 500-S then converts the measure current into a proportional voltage signal. This voltage signal is then used to view real-time measurements on a meter or oscilloscope.

The HAT 500-S current transducer works on the principle of Wheatstone bridge. This bridge consists of four arms, each one consisting of a resistor or active device. The HAT 500-S uses a composite branch consisting of a precision resistor and a high effectiveness burden module. It is connected in a series configuration by the primary, secondary and composite branches. The measured current passes through the resistor of the composite branch and a voltage signal is generated.

The applications utilities of the HAT 500-S current transducer are highly diverse. This device is suitable for both single phase and 3-phase electrical system. It can be used to measure the current in DC and AC circuits with accuracy ranging from ±1mA to 10 amps. It can be used in a variety of applications such as electric motors, solar electric systems, power quality instruments, process automation control systems, frequency converters, inverters, and more. Apart from industrial and commercial applications, it is also used in railway traction, aircraft, ships, and other high-power systems.

HAT 500-S current transducer is a cost-effective and reliable current transducer for a variety of applications. It accurately measures the output current when connected in series with the circuit. It works on the principle of Wheatstone bridge and it is used in single phase and 3-phase electrical systems. It can measure the current in DC andAC circuits and it can be used in electric motors, solar electric systems, power quality instruments, process-automation control systems, frequency converters, inverters, railway traction, aircraft, ships, and other high-power systems.

The specific data is subject to PDF, and the above content is for reference