PDTC143TU,115 Discrete Semiconductor Products

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The PDTC143TU,115 is a single, pre-biased bipolar junction transistor (BJT), a type of transistor with an emitter, base and collector. It is a solid-state device used in integrated circuits and other electronic systems to amplify and electrically switch signals. It is an analog device, meaning it operates continuously over a range of input voltages or currents. It works in either "cutoff" or "active" mode, depending on the applied base-emitter voltage. When activated, it allows a current to flow from its collector to its emitter.

The PDTC143TU,115 is a high-gain device, capable of providing high output currents with low input currents. It is designed to work with two supply voltages: the collector voltage and the base voltage. The base voltage is usually slightly higher than the collector voltage, which is known as pre-biasing, and enhances the gain by increasing the voltage amplification effect. The PDTC143TU,115 is a TO-92 package, making it suitable for most applications.

Application Fields

The PDTC143TU,115 is typically used in applications requiring low noise amplification, such as audio and video amplifiers, communication and sensing systems, machines, automotive systems, lighting, and computers. It is also used in high-efficiency pulse-width modulation (PWM) applications, such as motor control, LED illumination, and power regulation.

Working Principle

When the base and emitter of the PDTC143TU,115 are connected to a voltage source, a current flows between the two. This current is called the base current and can be controlled by varying the voltage source. This current then stimulates the flow of current from the collector to the emitter, which is known as the amplified collector current. The ratio of the collector current to the base current is known as the current gain of the device, which is usually higher than that of other transistors.

The application of a base current causes the transistor to enter the "active" mode. When the base voltage is below the emitter voltage, the transistor is in a "cutoff mode", where no current flows between the collector and the emitter. The dynamic behavior of the transistor while in active mode is governed by its small-signal voltage gain, and is affected by the current gain, collector-base capacitance and the amount of current flowing through the transistor.

The PDTC143TU,115 is an excellent choice for an array of applications, since it is a high-gain device and is pre-biased, meaning that the application of an external voltage is not required. It is capable of providing a high output current with a low input current, making it energy-efficient, and is easily mounted on a PCB or can be soldered using conventional means.

The specific data is subject to PDF, and the above content is for reference