EGP10CE-E3/54

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

EGP10CE-E3/54 is a single phase bridge rectifier diode with a nominal current rating of 10A and a peak repetetive reverse voltage (VRRM) of up to 1000V. It is designed especially for use in applications such as TV receivers, white goods and a variety of standard power supplies.

Applications

EGP10CE-E3/54 is an ideal choice for a range of AC rectification and power conditioning applications. It is used in battery chargers and solar panel inverters, as well as multi-output AC to DC switching power supplies. It can also be used in HID ballast applications such as streetlight poles, stadium floodlights and emergency lighting. The device\'s low forward voltage drop and reverse leakage current make it suitable for use in devices requiring low power losses.

Working Principle

The working principle of a single phase bridge rectifier is based on the PN junction diode. The diode can allow current to pass in only one direction, so when it is connected across an AC input source, the diode will only allow current to flow either from the negative side of the source to the positive terminal, or the reverse. Therefore, the voltage applied to the PN junction must alternate between the forward and reverse voltage polarities for proper operation.

In a single phase bridge circuit, four(4) PN junction diodes are connected in the form of a bridge. This bridge allows current to pass from the input AC source to the load, with the proper current flow depending on the AC waveform polarity. This allows the bridge to rectify the AC voltage into a DC voltage, which is then supplied to the load.

The power dissipation of a single phase bridge rectifier depends on the rectified circuit current and the specific rectifiers used. The maximum power dissipation rating of the EGP10CE-E3/54 is 4 watts for a forward current of 10 Amps and a junction temperature of 25 °C. It is important to ensure that the device is derated properly for high ambient temperature.

The specific data is subject to PDF, and the above content is for reference