EGP10G Discrete Semiconductor Products

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

EGP10G diodes are rectifiers and are commonly used for single power source circuit applications. They are also referred to as low-power rectifiers due to their limited current capability. The EGP10G diode has a typical forward voltage drop of 1V and features a low forward voltage and good thermal stability, making it an ideal choice for applications where power saving and efficiency are important.

The EGP10G is a 3 pin diode, with two outer pins connecting to the anode and cathode, and an inner pin connecting to the anode. The outer pins are then connected to the circuit, while the inner pin connects to a power source. This creates a unidirectional current, allowing for a reverse bias voltage to be applied to the inner pin only, allowing for current flow in the opposite direction.

The working of the EGP10G diode is based on the principle of PN junction diode. A PN junction diode is a two-terminal electronic device that allows current to flow in one direction only. It acts like a switch and is used to control the flow of current. When the anode and cathode terminals are connected to a positive voltage, current begins to flow through the device. This creates a voltage drop in the circuit, which is the forward voltage.

When the anode and cathode terminals are connected to a negative voltage, the PN junction diode is reversed and current can not flow. This is known as a reverse bias and can be used to create a protective layer in the circuit, allowing for the rest of the circuit to remain undamaged from high voltage. This is extremely useful in single power source circuits, where voltage spikes can cause significant damage.

The EGP10G diode is also very sensitive to excessive current and heat, so it is important to ensure that suitable current limiting measures are taken when using it in a circuit. This can be done by using an appropriate resistor with the EGP10G diode, which will prevent the device from being damaged by excessive current.

Overall, the EGP10G diode is an excellent choice for applications requiring single power source circuit protection. With its low forward voltage and good thermal stability, the EGP10G is a reliable and safe choice for protecting circuits from voltage spikes and other damage. It is important to use the device appropriately and to provide current limiting measures to ensure optimal performance and reliability.

The specific data is subject to PDF, and the above content is for reference