EGP10CHE3/54

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Rectifiers - Single

A single diode rectifier, also known as a half-wave rectifier, is the simplest type of rectifier that makes use of only one diode. Despite its simplicity, the single diode rectifier can perform the same basic job of transforming an AC voltage into a DC voltage, albeit with certain drawbacks that would not be found in more complex rectifiers.

EGP10CHE3/54 Application Field and Working Principle

The EGP10CHE3/54 is a single diode rectifier produced by Littelfuse, a leader in automotive circuit protection. It is commonly used in motor vehicle environments, where it can provide protection against overvoltage and reverse voltage. In addition, the EGP10CHE3/54 can be used for a variety of non-automotive applications, such as power supplies and home electronics. In order to operate effectively, the EGP10CHE3/54 must be used primarily in its forward bias state. When in this state, the forward current (the current flowing from the anode to the cathode) increases with the applied voltage. This increases the voltage drop across the diode (known as the forward voltage drop), resulting in a decreased output voltage. The EGP10CHE3/54 is designed to provide a constant voltage drop in its forward biased state, meaning that its output voltage is proportional to the input voltage.The reverse bias state is used when the input voltage is greater than the output voltage, resulting in the diode being switched off. During this state, the output voltage is equal to the input voltage. In contrast to the forward bias state, the amount of reverse current (current flowing from the cathode to the anode) stays constant, no matter how high the input voltage. In addition to its voltage regulation capabilities, the EGP10CHE3/54 also provides surge protection and reverse current protection. The EGP10CHE3/54 is designed to withstand very high reverse voltage without becoming damaged, allowing it to protect the rest of the circuit from overvoltage and reverse voltage. In addition, it can protect against surges of high current, shielding the circuit from dangerous surges.

The specific data is subject to PDF, and the above content is for reference