N25Q064A13ESF40F TR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The N25Q064A13ESF40F TR is a Quad SPI serial NOR Flash memory device designed to store code and data. It is built with an 8-pin Quad SPI interface allowing it to communicate with SPI-supporting host microcontroller platforms including ARM Cortex and AVR platforms, CPLD devices and any other digital interface that can support the SPI protocol. It is also used in some non-volatile memory applications.

The N25Q064A13ESF40F TR is a 64Mbits (8MBytes or 8,388,608 bytes) memory device which is organized as 8-bit words or as 4-bit words. The device provides in system programmability and erasability of all of its contents. The device is operated by commands through the Quad SPI port.

N25Q064A13ESF40F TR is ideal for code storage, code and data execution, FPGA configuration, operating system files and system data storage, boot code and other applications where a very small form factor, high performance, reliability and nonvolatile memory are required.

Application Field

N25Q064A13ESF40F TR memory devices can be found in a variety of applications such as automotive, industrial, consumer, and medical applications. These memory devices are used in applications such as car navigation systems, fingerprint recognition systems, blood analysers, motor controllers, DSP systems, digital cameras, and many more.

The devices are also used in laptops, PCs and tablets. It can also be used in GPS devices, Wearables and digital audio players. The N25Q064A13ESF40F TR is a highly flexible memory solution for storing and retrieving data in embedded applications.

Working Principle

N25Q064A13ESF40F TR uses Quad SPI to communicate with the host processor. The device can also use Serial mode, Dual mode, and Quad mode. These modes are used to determine the speed of data communication between the host processor and the device.

The Quad SPI mode requires four lines: CS, SI, SO and SCK. When the host processor receives a command, it transmits the command and corresponding data to the device by driving the serial input line (SI). The device then transmits the data back to the host processor on the serial output line (SO). The device is read-modify-write optimized to facilitate fast data access with minimal number of memory operations.

N25Q064A13ESF40F TR also includes a Multi I/O Read/Write feature which can be used to further enhance the performance of data transmission and access. This feature enables the user to use configuration options such as quad, dual or single I/O for the SI and SO pins which can enable higher read and write speeds.

The device also incorporates an advanced error correction code (ECC) which reduces the possibility of data corruption due to bit errors. This feature ensures that the data is accurate and reliable after transmission.

The N25Q064A13ESF40F TR also includes onboard write protection which is used to protect the device from unintentional program or erase operations. This ensures the reliability and security of data stored in the device.

In addition, the N25Q064A13ESF40F TR also includes a versatile auto-programming feature which can be used to automatically program the contents of a designated memory space with a user-defined data pattern.

The N25Q064A13ESF40F TR can also be used in low power applications due to its low operating current and its low standby current. These features make it highly suitable for applications where power consumption is a critical factor.

Overall, the N25Q064A13ESF40F TR offers a simple and robust solution for applications where low power, reliability, security and high performance are critical requirements.

The specific data is subject to PDF, and the above content is for reference