LED digital tube.
On 2021-03-03 10:32:13 in Generally electronic component
What is a high-power Darlington tube ( module )?
On 2018-10-27 11:25:32 in IC Chips
The high-power Darlington tube is internally connected with a protective device,and the internal structure of the high-power Darlington tube is shown in Figure ...
How to test and repair the rectifier bridge?
On 2018-10-26 15:52:31 in IC Chips
Distinguish polarity to place the multimeter in RX1kQ block,and the black stylus arbitrarily connect a pin of the whole bridge component,and measure the other three pins with the red stylus,if the measured resistance is infinite ...
What is a monochrome LED dot matrix display?
On 2018-10-29 15:27:20 in Relays
Excellent LED dot matrix display is a monochrome light-emitting diode in accordance with the structure of rows and columns ...
What are the benefits of using FPGAs with on-chip high-speed networking?
On 2023-07-05 11:23:54 in IC Chips
what is an infrared receiver?
On 2018-10-26 16:53:35 in Memory
The infrared receiving tube is a semiconductor device used to receive the infrared light wave generated by the infrared light emitting diode and convert it into electrical signal. ...
How to measure the transistor?
On 2019-10-30 10:34:17 in Discrete Semiconductor
What is the relationship between the charging speed of a smartphone and the charging interface?
On 2021-08-14 10:47:44 in Connector
What are the structure, characteristics and classification of semiconductor read-only memory?
On 2021-04-13 10:52:08 in Crystals Oscillators/Resonators
Structure and characteristics
On 2018-11-01 16:47:41 in Memory
LED digital tube also known as semiconductor digital tube ( Figure 1-1-5 ),it is a number of light-emitting diodes arranged in a fixed pattern and packaged together the most commonly used digital display one of the devices ...
How to measure capacitance capacity?
On 2019-11-09 10:29:13 in Capacitors
Detailed explanation of the rectification circuit of the DC regulated power supply
On 2023-03-08 13:38:07 in IC Chips
Rectifier circuit is an integral part of DC-to-DC converters, which uses diodes to convert the incoming AC signal into a single and consistent DC signal. The transformer adjusts the AC signal before it is filtered, and the error amplifier monitors the out ...
What are the commonly used power semiconductor devices?
On 2020-03-10 11:58:35 in Generally electronic semiconductor
When using resistance and line on-off test mode of the automotive digital multimeter.
On 2019-04-22 14:33:41 in Knownlege
This article write about when using resistance and line on-off test mode of the automotive digital multimeter.The correct method of choosing gear and connecting detection line is adopted. ...
Types and detection methods of switching devices
On 2018-11-01 16:57:50 in Relays
The switch is the component that completes the electrical connection and disconnection through a certain action,which is generally connected in series to realize the transmission and control of signal and electric energy ...
Classification of integrated circuits
On 2018-12-03 13:18:15 in IC Chips
Second,the package of the integrated circuit
On 2018-10-31 11:25:58 in IC Chips
the detection of the resistor
On 2018-10-31 10:55:57 in Memory
Will be two pen ( regardless of the positive and negative ) are connected with the two ends of the resistor can be connected to measure the actual resistance value ( in order to improve the measurement accuracy ...
What about low-capacitance EMI filters with improved performance?
On 2020-11-03 12:08:19 in Generally electronic semiconductor
What is the difference between a photodiode and a photomultiplier?
On 2020-03-17 10:05:17 in IC Chips
How to use the negative output voltage to adjust the LED current in a buck-boost topology?
On 2020-03-16 10:14:18 in IC Chips
What is the difference between different panels?
On 2021-10-22 11:13:25 in Generally electronic component
What is the reverse protection circuit and the anti-reverse protection circuit?
On 2019-08-13 10:28:29 in Generally electronic component
What is an infrared receiver?
On 2019-01-02 16:02:03 in Generally electronic semiconductor
Integrated circuit
On 2019-01-04 14:50:02 in IC Chips
How to detect and repair ?
On 2018-12-20 13:52:32 in Photoelectric
RJ45 Connectors
On 2023-03-04 14:24:38 in Capacitors
RJ45 connector is a networking component consisting of pins, plastic cover and metal contacts, used to connect two devices and store electrical charge for data transmission. ...
What types of monitors are divided into display technologies?
On 2021-11-27 10:41:03 in Photoelectric
What are the advantages of OLED?
On 2021-11-04 10:44:37 in Photoelectric
What is a BTG thyristor?
On 2018-10-29 15:06:32 in Generally electronic semiconductor
The BTG thyristor is a special semiconductor device.The utility model can be used as a thyristor and can be used as a single junction transistor ( double base diode ) ...
ISO1540 and ISO1541 isolate the logic high and low input voltage levels of I2C devices
On 2019-07-29 11:17:46 in Generally electronic component
This article briefly introduces ISO1540 and ISO1541 isolate the logic high and low input voltage levels of I2C devices ...
What is a varactor and how to detect it?
On 2019-01-04 10:52:48 in Generally electronic semiconductor
how to detect the LED emission tube?
On 2018-10-26 16:31:21 in Memory
The use of multimeter to detect LED luminous platoon is mainly to check whether the LEDs are good ...
What is a transistor? What's the role?
On 2018-10-27 10:46:55 in Relays
Transistors are also called semiconductor diodes,which can be said to be the most important devices in electronic circuits ...
What are the symbols represent in circuit diagram?
On 2019-03-26 11:26:30 in Generally electronic component
How to detect the BTG thyristor?
On 2018-10-29 15:08:36 in Memory
Judging the electrode to place the multimeter in RX1K2 block,and the red and black stylus rotation to connect a pair of electrodes,when a pair of pins is measured to be low resistance ...
Potentiometer detection and resistance detection
On 2018-08-22 12:04:06 in Relays
The actual resistance value can be measured by connecting two forms (no positive or negative) to the two ends of the resistor respectively. ...
What is a LED emission tube and how to detect it?
On 2018-12-21 14:28:11 in Photoelectric
LED digital tube
On 2018-12-13 14:17:22 in Generally electronic semiconductor
Intel dual bridge G41 chipset motherboard timing.
On 2019-11-25 11:21:43 in IC Chips
