2N2907

Series:	--
Packaging:	Bulk
Part Status:	Active
Transistor Type:	PNP
Current - Collector (Ic) (Max):	600mA
Voltage - Collector Emitter Breakdown (Max):	40V
Vce Saturation (Max) @ Ib, Ic:	1.6V @ 50mA, 500mA
Current - Collector Cutoff (Max):	20nA (ICBO)
DC Current Gain (hFE) (Min) @ Ic, Vce:	100 @ 150mA, 10V
Power - Max:	1.8W
Frequency - Transition:	200MHz
Operating Temperature:	-65°C ~ 200°C (TJ)
Mounting Type:	Through Hole
Package / Case:	TO-206AA, TO-18-3 Metal Can
Supplier Device Package:	TO-18

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

<div class="single-bjt-content">The 2N2907 is a type of NPN transistor commonly used when creating and building electronic components. This type of transistor is a Bipolar Junction Transistor (BJT), which are three terminal devices that control current flow through the collected junction between emitter and collector. The 2N2907 transistor has recording capability and is capable of producing an output current of 800mA.</div><h4>Application Field of 2N2907</h4><div class="single-bjt-app">The 2N2907 is often used as an amplifying device and switching device. This type of transistor is widely used in low-power applications, often used in logic circuits and Darlington pairs (a combination of two transistors). It is typically used for small and micro-sized inductive and reed switches, often used for activating and controlling small solenoids. This is why many people consider the 2N2907 ideal for controlling and operating small motors or similar electronic components.</div><h4>Working Principle of 2N2907</h4><div class="single-bjt-principle">The 2N2907 transistor works on the principle that “the collector current can be controlled by the base current”. By regulating the base current, you can engineer the output current at the collector side accordingly. The device is simply two diodes connected together with a base in the middle. The diode with the anode attached to the base and the cathode attached to the collector is called an NPN. The other diode with the cathode attached to the base, and the anode attached to the emitter is called a PNP. This configuration allows for two alternating flow paths for carriers, thus providing for current flow through the transistor when a voltage is applied. The device can be used either as an amplifier or to switch on/off the flow of current from one terminal to another. When the base current is higher than the required current, excess carriers flow through the transistor, resulting in amplification of the signal. The amplification provided by the 2N2907 depends upon the ratio between its base current and its collector current. </div>

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description