2N2906AL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

2N2906AL is a general-purpose PNP small-signal bipolar junction transistor (BJT) manufactured by several manufacturers. It has a maximum DC current gain of 110, and a maximum power dissipation of 1.25 watts. This transistor is widely used for all sorts of applications, from amplification and switching to linear and digital logic. It is available in an inexpensive TO-92 package which is widely used in consumer electronics.

The 2N2906AL is commonly used as a simple non-inverting amplifier or switching circuit, consisting of an input signal applied to the base terminal and a fixed voltage applied to the emitter terminals. It can also be used as a voltage regulator, voltage divider, or as a common-base amplifier. The 2N2906AL can be used in all types of applications from small signal to power amplifiers, oscillators, or switches in relay drivers. Due to its low price, it is widely used in consumer electronics, such as cd players, sound systems, and video cassettes.

The working principle of the 2N2906AL is fairly simple. The collector-base junction acts as a diode, allowing current to flow from the collector to the base, creating a small emitter current. This emitter current is then fed back to the base, creating a positive feedback loop. This feedback loop amplifies the input signal, and the output voltage is thus determined by the base-emitter voltage, the base-emitter resistance, and the transistor’s current gain.

The most common application for the 2N2906AL is as a switch. The transistor is used as an amplifier device with two types of switching input: a single-pole-single-throw (SPST) and a single-pole-double-throw (SPDT). A SPST switch is a type of switch that opens or closes a circuit with a single contact and is used mostly for switching on and off power. A SPDT switch, on the other hand, allows for two different AC and DC conditions and is used in applications that require switching between two different circuits or power supplies. In either application, the 2N2906AL acts as a relay to control the flow of current in the circuit.

The 2N2906AL is also used in digital logic circuits. As a logic circuit, the 2N2906AL is the most common type of logic gate that is used to implement logic functions such as AND, OR, NOT, Flip-flops and counters. In digital logic circuits, the transistor acts as a switch, allowing current to flow between two states. A logic state includes two opposite binary values, either 0 or 1. The transistor acts as an inverter, switching between two opposite states as opposed to a diode, which allows either 0 or 1. The schematic representation of the logic state is made up of transistors, resistors, and connection points. By connecting these components, logic functions can be implemented.

The 2N2906AL is the most widely used general-purpose bipolar junction transistor for small-signal applications. Thanks to its low price and reliable performance, it is used in a wide array of products and applications, from audio and video systems to computers and other digital logic devices. It is also used in many industrial applications, such as in transistor array devices, as well as in high voltage regulated supplies and current limiting circuits. Its wide availability and popularity make it an ideal choice for any application.

The specific data is subject to PDF, and the above content is for reference