2N4403

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 2N4403 is a general purpose NPN bipolar junction transistor. It belongs to the BJT - single category for transistors. It was designed for use as a low noise amplifier, high frequency switching device, and general purpose audio amplifier, and it has been found to be suited for use in a wide variety of applications.

The 2N4403 is constructed of three layers which communicate through a small area called the emitter-base junction. These three layers are a base, the emitter and the collector. The base layer acts like a control electrode, and current flowing through it can alter the level of current in the other two layers. The emitter-base junction acts a diode, allowing current to flow one way and not the other. The collector acts like a drain, pulling the current away from the emitter-base junction.

In 2N4403 transistors, the base is represented by a thin patch of lightly doped semiconductor material of an area about 20 to 30 times larger than the emitter-base junction area, allowing it to control the larger current of the emitter collector circuit. The base-collector junction is reverse-biased, allowing it to act as an open switch. As a result, current flowing from the collector to the base can only branch off onto the emitter in one direction.

The 2N4403 is a low noise amplifier, making it an ideal choice for use in audio systems and for signal amplification. This transistor can also be used for high frequency switching applications due to its fast turn-on and turn-off speeds. It can also be used in a wide variety of situations such as RF amplifiers, preamplifiers, power amplifiers and oscillators. It can also be used as an analog voltage control. As an amplifier, the 2N4403 has a relatively low noise floor and low distortion.

The 2N4403 is a general purpose NPN bipolar junction transistor that is used in a wide variety of applications. It is capable of handling a large range of current and operating frequencies due to its thin buffer layer, reverse-biased collector-base junction, and fast turn-on and turn-off speeds. It supports high-frequency switching applications and can also be used for signal amplification with its low noise floor and low distortion. Lastly, the 2N4403 can be used as an analog voltage control.

The specific data is subject to PDF, and the above content is for reference