2N6649

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Bipolar transistors are the basis for most modern electronics and the 2N6649 is an example of a single bipolar transistor. It has a continuous collector-emitter voltage of 25 Volts, with storage at this voltage from -65 to 175 degrees Celsius. It also has a maximum operating frequency of 1 MHz and its primary applications include switching circuits and linear amplifiers.

This type of transistor is made from n-type and p-type semiconductor material, often silicon. The n-type material is the main component, with small amounts of p-type material creating the regions known as base and collector. Contacts to each region are connected externally to the package, making the transistor usable. When current is applied to the base region the amount of current that flows to the collector increases, depending on the current applied to the base. This current amplification is the key feature of the bipolar transistor.

The 2N6649 is a BJT type of bipolar transistor, meaning it has three layers, base, collector and emitter, of semiconductor material. Its collector current ranges from 1.2 Amps and its gain is typically between 40 and 120 when used in linear applications. To achieve a higher gain, the transistor can also be used in switching applications. The typical collector-emitterCutoff Voltage of 4 Volts is what helps make this bipolar transistor work in an alternating current circuit.

The 2N6649 can be used in switching applications, where it acts as an electronic switch, using current rate control to turn on and off signals. This type of transistor can also be used in amplifying applications, where it takes a small signal and amplifies it using its gain characteristics. When used in this way, the 2N6649 can be used to amplify a signal from a microphone, for example. In addition to these two types of applications, the 2N6649 can also be used in a precision voltage regulator.

The working principle of the 2N6649 is quite simple. It can be used in either a switch or amplifier application. In a switch application, the base current is switched on or off to control the collector current, and in an amplifier application, the collector current is increased or decreased depending on the application, with the transistor providing an amplification of the input signal. This makes it a great choice for any circuit, from small logic circuits to large power amplifiers.

In conclusion, the 2N6649 is a single bipolar transistor which has many applications. It can be used in both linear and switching applications, and is a great choice for any circuit. Its continuous collector-emitter voltage of 25 Volts and its maximum operating frequency of 1 MHz make it a great choice for precision voltage regulation, amplify signals and switch large signals into small signals. Its gain can be adjusted to provide a wide range of gain values depending on the application.

The specific data is subject to PDF, and the above content is for reference