BS170RLRAG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

BS170RLRAG is a type of field-effect transistor (FET) that is used in many electronic applications. It is a single-gate MOSFET (metal-oxide semiconductor field-effect transistor). This device is a small polarity FET that is primarily used as a linear amplifier in low-voltage amplifier applications. This article will explain the application field and working principle of BS170RLRAG.

The BS170RLRAG is a general-purpose N-channel MOSFET, which means the gate-source voltage must always be negative. It has an insulated gate, which restricts the electric current from flowing into it. This means the BS170RLRAG can be used for both voltage and current amplifications. Moreover, the FET is made of a silicon oxide (SiO) insulator and aluminum (Al) electrodes, which make it resistant to oxidation and thus increase its operational life.

The BS170RLRAG is an ideal switch because of its very low on-resistance (the ratio of the gate voltage to the drain current). With a low on-resistance, very little current is used to operate the switch and this helps reduce power consumption. In addition, because of its low on-resistance it can also act as a differential amplifier, making it suitable for use in a wide range of amplifier applications. The device has a maximum voltage rating of 200V and an acceptable noise margin of -2.5 mV.

The BS170RLRAG operates on a conventional working principle – the higher the gate voltage, the higher the current across it. This is due to the current-voltage relationship of a MOSFET. When the gate voltage exceeds the threshold voltage, current flows through the drain, source, and gate of the transistor. The current flow is proportional to the voltage applied to the gate and the applied power voltage. This is called the “on-state” of the device. When the gate voltage is below the threshold voltage, no current is allowed to flow. This is called the “off-state” of the device. Thus, the BS170RLRAG can easily be switched on and off.

The BS170RLRAG is used in many applications such as power amplifiers, current amplifiers, voltage amplifiers, voltage limiters, frequency multipliers, radio frequency amplifiers, television broadcast transmitters, and many more. In addition, the BS170RLRAG is usually integrated in IC chips, making it more useful for many other applications. For example, the device can be used in switching power supplies, switching regulators, and low-power voltage regulators.

In conclusion, the BS170RLRAG is a single-gate MOSFET that is suitable for a wide range of electronic applications. It is made of a silicon oxide insulator and aluminum electrodes, which make it resistant to oxidation and thus increase its operational life. It has a very low on-resistance and can act as a voltage and current amplifier. The device has a maximum voltage rating of 200V and an acceptable noise margin of -2.5 mV. It is used in power amplifiers, current amplifiers, voltage amplifiers, voltage limiters, frequency multipliers, radio frequency amplifiers, television broadcast transmitters, and many more. In addition, the BS170RLRAG is usually integrated in IC chips for use in many other applications.

The specific data is subject to PDF, and the above content is for reference