FZT690BTC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The FZT690BTC is categorized as a Bipolar Junction Transistor, or BJT for short. BJTs are three terminal devices, which use conduction current between the two opposite polarity terminals to control the current flow between the two other terminals. The FZT690BTC is a single BJT with a specific purpose. The application of this BJT is for low noise amplifier and switch circuits.

A BJT is an active semiconductor device that is made from two p-n junctions joined together. It has three main terminals, namely the collector (C), base (B) and emitter (E). The BJT works on the principle of controlling the flow of current between the C and E terminals using the information applied to the B terminal. Depending on the operating principle, the BJT can be further categorized as N-type or P-type transistors. N-type transistors operate on the principle of minority carrier injection, which is when a small amount of holes are injected into the N-type material. P-type transistors operate on the principle of majority carrier injection, using electrons.

The FZT690BTC is a PNP type BJT. This means that it uses majority carrier injection, where electrons are injected from the base into the P material. This injection results in a large current flow between the C and E terminals, allowing for an amplifying function. The gain of the FZT690BTC is typically 200, and its high amplification rate makes it optimal for low noise amplifier circuits. It is also able to handle currents of up to 800mA at collector currents of 5A and is able to operate at frequencies of up to 1.5GHz.

The FZT690BTC is also used in switch circuits. When there is no voltage applied to the B terminal, the C and E terminals are essentially short-circuited, which cuts the power to whatever circuit is attached. When the voltage is applied to the B terminal, the transistor turns on, resulting in a large current flow between the C and E terminals, which powers up the attached circuit. This is why the FZT690BTC is often used in switch circuits, as it provides both power and control of the circuit.

In conclusion, the FZT690BTC is categorized as a PNP type BJT for use in low noise amplifier and switch circuits. It has a gain of 200 and is able to handle currents of up to 800mA at collector currents of 5A. It operates on the principle of majority carrier injection, using electrons to activate the transistor, which results in a large current flow between the C and E terminals. As such, it is the perfect transistor for powering and controlling circuits with minimal noise.

The specific data is subject to PDF, and the above content is for reference