PDTC144EU/ZLX

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The PDTC144EU/ZLX is a type of actuator used for a variety of applications across many industries. It is designed to convert electrical power into pneumatic power for use in automated systems. It is capable of providing precise, repeatable and reliable actuation in both open and closed loop configurations. This makes the PDTC144EU/ZLX ideal for industrial and commercial applications in the aerospace, automotive, consumer, robotics and mass-transit industries, to name a few.

The PDTC144EU/ZLX is powered by a 12 inch brush-less DC motor that is capable of producing up to 1200 pounds of thrust at up to 9,500 rpm. This makes it one of the most powerful actuators available on the market today. The actuator is designed to operate with an input voltage of 36 to 48 volts DC and a current draw of up to 11.6 amps at its maximum rated output. This makes the PDTC144EU/ZLX ideal for use in electric vehicles, hybrid vehicles and other high-power applications.

The actuator is also equipped with a variety of sensors that provide feedback to its electronic control unit (ECU). These feedback signals enable the PDTC144EU/ZLX to be accurately controlled in a closed loop system. The feedback signals enable the ECU to adjust logic based on attributes such as temperature, humidity, current, voltage, and torque.

When the PDTC144EU/ZLX is used in an open loop configuration, it can be controlled by an external input signal, such as from a potentiometer, position sensor, or joystick. In an open loop configuration, the actuator will respond directly to an external input signal without the need for feedback from the electronic control unit.

The PDTC144EU/ZLX is capable of performing a variety of motion profiles including velocity, acceleration, deceleration, speed, position and torque. This makes it suitable for applications where precise motion profiles are required, such as robotic arms used in the assembly of small components. The PDTC144EU/ZLX also has two modes of operation: ‘continuous’ and ‘pulsed’. The ‘continuous’ mode allows for a steady flow of thrust, while the ‘pulsed’ mode enables the actuator to generate a short burst of thrust at a predetermined frequency.

The PDTC144EU/ZLX is designed for long-term reliable operation in harsh industrial environments. It is protected from dust and other contaminants by its closed-loop sealing system and aluminum housing. The actuator also has an IP-67 rating, meaning that it is dust-tight and capable of withstanding submersion up to 1 meter for 30 minutes. These features allow the PDTC144EU/ZLX to operate reliably in extreme temperature and humidity ranges.

The PDTC144EU/ZLX can be used as the backbone of a wide variety of motion control systems. It is capable of providing precise and reliable actuation in both open and closed loop configurations. Its high power and rugged design make the PDTC144EU/ZLX ideally suited for use in demanding industrial applications where precise actuation and motion control is needed. Its wide range of operational modes and feedback sensing capabilities allow the PDTC144EU/ZLX to be used in a variety of applications across many industries.

The specific data is subject to PDF, and the above content is for reference