2N5245

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 2N5245 is a high voltage, fast-switching, N-Channel Junction Field-Effect Transistor (JFET). It is specifically designed for radio frequency applications where fast switching and high-voltage capability are required. As its high voltage and fast switching characteristics are well suited for an array of communication systems, the 2N5245 can be found in products such as transmitters, receivers, mixer amplifiers, phase locked loops, and frequency multipliers.

The 2N5245 is a three-terminal device consisting of an N-Channel, a gate, and a drain. It operates by varying the current passing through the N-Channel in response to variations in the gate voltage. When the gate voltage is positive relative to the source, current flows between the source and the drain. When the gate voltage is negative relative to the source, current flow between the source and the drain stops.

The 2N5245 is capable of withstanding relatively high voltages in the order of several hundred volts in drain-source breakdown. This is enabled by the presence of a nested structure of P-type and N-type junctions, which forms an inherent voltage regulator. This high breakdown voltage is typically accompanied by low gate leakage currents.

The maximum voltage rating of this device is typically 1700 volts. This value is dependent on the body diode drop, which should not exceed 1.5V for proper operation. The device also features a 9v gate-to-source voltage rating. The maximum operating temperature of the device is 250°C.

In terms of drain current, the 2N5245 can handle peak currents of up to 0.5A. With a forward transfer admittance of around 20 milli-mho, the device presents a low on-resistance and a large capacitance at high frequencies, making it ideal for applications that require fast transmission or reception of radio waves.

As far as the maximum power is concerned, the 2N5245 is well suited for radio frequency applications where the power dissipation is typically low. It has a maximum power rating of 0.5 watts and a maximum operating frequency of 30MHz. This makes it an ideal choice for high frequency communication applications.

The 2N5245 can be used in a variety of applications where its fast switching, high voltage capabilities and strong conductive properties can be put to good use. One such application is a frequency multiplier. A frequency multiplier is a device that takes an input frequency and produces an output frequency that is a multiple of the input. This is done by using the device\'s fast switching characteristics to switch the existing signal to a higher frequency.

The device can also be used in transmitters and receivers in communication systems. It can be employed as a preamplifier to amplify the radio signal and convert it to lower and higher frequency signals. It also has low noise properties, which make it ideal for radio receivers.

The 2N5245 JFET is a versatile device and can be used in a wide range of radio frequency applications. Its rise and fall times are extremely fast, making it ideal for fast switching applications. Its high voltage, low current characteristics and low noise figure make it suitable for a range of communication systems. Finally, its peak current rating and capacitive properties make it a good choice for high frequency applications, such as frequency multipliers.

The specific data is subject to PDF, and the above content is for reference