Series:	--
Packaging:	Bulk
Part Status:	Obsolete
Transistor Type:	NPN
Current - Collector (Ic) (Max):	2A
Voltage - Collector Emitter Breakdown (Max):	50V
Vce Saturation (Max) @ Ib, Ic:	500mV @ 50mA, 1A
Current - Collector Cutoff (Max):	1µA (ICBO)
DC Current Gain (hFE) (Min) @ Ic, Vce:	70 @ 500mA, 2V
Power - Max:	900mW
Frequency - Transition:	100MHz
Operating Temperature:	150°C (TJ)
Mounting Type:	Through Hole
Package / Case:	TO-226-3, TO-92-3 Long Body
Supplier Device Package:	TO-92MOD

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

2SC2655-Y(HIT,F,M) Application Field and Working Principle

Introduction

The 2SC2655-Y(HIT,F,M) is a NPN type transistor produced by the Hitachi Corporation. It belongs to the classification of transistors known as Bipolar (BJT) - Single. This type of transistor is designed to handle high current and act as switches in various applications, such as amplifiers and power supplies. This article will explore the application field and working principle of 2SC2655-Y(HIT,F,M) transistors.

Application Field

The 2SC2655-Y(HIT,F,M) transistor is primarily used in power supplies. It is used to regulate the output voltage by controlling the amount of current that can be drawn from the power supply. The 2SC2655-Y(HIT,F,M) transistor can also be used in amplifier circuits, where it provides the necessary gain to amplify an electrical signal. Additionally, the transistor can also be used to control motor speeds as well as to switch on/off various devices.

Characteristics

The 2SC2655-Y(HIT,F,M) transistor is a NPN type transistor, meaning that it has three terminals. These terminals are the collector (C), the emitter (E), and the base (B). The collector is connected to the power supply and the base is used to control the transistor. The base current serves as the input signal, which is then amplified and passed on to the collector. The 2SC2655-Y(HIT,F,M) has a maximum collector-emitter voltage of 20 Volts and a collector current of 6.5A. It also has a maximum collector power dissipation of 25Watts. Furthermore, it has a high gain bandwidth product of 4.5MHz and a collector-emitter voltage of 1.5V(zener breakdown) at the minimum.

Advantages

The 2SC2655-Y(HIT,F,M) transistor has several advantages over other transistors of the same type. Firstly, it has a higher power rating which means that it can be used in high-power applications. Secondly, the transistor has a high gain bandwidth product which enables it to be used in high-speed applications, such as motor control. Thirdly, the transistor has an extended junction temperature rating that allows it to withstand higher temperatures. Finally, the 2SC2655-Y(HIT,F,M) transistor is relatively inexpensive and easy to find.

Working Principle

The 2SC2655-Y(HIT,F,M) transistor is a NPN type transistor and its working principle is based on the flow of electrons. When a small current is applied to the base terminal of the transistor, it results in a larger current flowing from the collector to the emitter. This current is amplified and can be used to control the output voltage of a power supply, the motor speed of a motor, or to act as a switch in an amplifier.The 2SC2655-Y(HIT,F,M) transistor acts as an amplifier because it changes the current at the base terminal into the current that flows between the collector and emitter terminals. In other words, the base current is amplified before reaching the collector and the amount of current that flows between the collector and emitter can be controlled by varying the base current.

Conclusion

The 2SC2655-Y(HIT,F,M) is a NPN type transistor produced by the Hitachi Corporation. It belongs to the classification of transistors known as Bipolar (BJT) - Single, and it is used in power supplies, amplifiers, motor control, and other applications. The transistor has a maximum collector-emitter voltage of 20 Volts, a collector current of 6.5A, and a maximum collector power dissipation of 25Watts. Furthermore, it has a high gain bandwidth product of 4.5MHz and a collector-emitter voltage of 1.5V(zener breakdown) at the minimum. The working principle of the 2SC2655-Y(HIT,F,M) transistor is based on the flow of electrons, where a small base current is amplified before reaching the collector. The transistor also has several advantages such as high power rating, extended junction temperature rating as well as cost effectiveness.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description