DDTB113ZU-7-F

DC Current Gain (hFE) (Min) @ Ic, Vce:	56 @ 50mA, 5V
Base Part Number:	DTB113
Supplier Device Package:	SOT-323
Package / Case:	SC-70, SOT-323
Mounting Type:	Surface Mount
Power - Max:	200mW
Frequency - Transition:	200MHz
Current - Collector Cutoff (Max):	500nA
Vce Saturation (Max) @ Ib, Ic:	300mV @ 2.5mA, 50mA
Series:	--
Resistor - Emitter Base (R2):	10 kOhms
Resistor - Base (R1):	1 kOhms
Voltage - Collector Emitter Breakdown (Max):	50V
Current - Collector (Ic) (Max):	500mA
Transistor Type:	PNP - Pre-Biased
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DDTB113ZU-7-F is a single, pre-biased bipolar junction transistor (BJT). It belongs to a family of transistors known as "pre-biased" because the two junctions of the transistor are pre-biased when the circuit is powered on. This makes it easier to control the flow of current within the circuit.The primary use of the DDTB113ZU-7-F is to function as an amplifier. As such, it can increase the power of a signal by increasing the voltage or current level. This makes DDTB113ZU-7-F suitable for applications in audio and power amplifiers, as well as signal processing. In addition, it is often used as a switch to control the flow of current or as a current regulator.The working principle of DDTB113ZU-7-F is based on the transistor\'s three terminals: the emitter, base, and collector. When power is applied, the emitter injects electrons into the base, which lowers the base current and causes the collector current to increase. This increase in current is used to amplify a signal. The amount of amplification is determined by the ratio of the collector current to the base current, known as the gain.In addition to amplifiers, DDTB113ZU-7-F can also be used as a switch. The base current is used to control the collector current, allowing it to be switched on and off like a switch. This makes it well suited for digital logic applications, such as those in computers and microprocessors.In summary, the DDTB113ZU-7-F is a single, pre-biased bipolar junction transistor. Its primary function is as an amplifier, however it can also be used as a switch in digital logic applications. It works by changing the flow of current between the emitter, base, and collector, and its gain is determined by the ratio of the collector current to the base current.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description