DDTC123YCA-7-F

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Bipolar Junction Transistors (BJTs) is the most commonly used transistors in the electronics industry. The DDTC123YCA-7-F is a single pre-biased BJT, designed for low frequency switching applications. This dual transistor consists of two NPN transistors that are connected in series, with one of the transistors also connected to a timing resistor. The resistor provides the necessary bias voltage to the collector of the other transistor, which allows the transistors to switch during operation and provide low frequency switching.

The DDTC123YCA-7-F is typically used in applications that require a low frequency switching capability, such as motor control circuits, relays, and light dimmers. The device is also useful in audio amplifiers and other low-current applications. The device has a maximum collector-emitter voltage rating of 30V and a current rating of 1A. It is available in a variety of packages, including a TO-220-black package with a typical voltage rating of 70V.

The DDTC123YCA-7-F works on a principle called "biasing", which means that the base-emitter voltage needs to be higher than the collector-emitter voltage in order for the transistor to conduct current. The pre-biased transistor has a fixed base-emitter voltage and a variable collector-emitter voltage, which is controlled by the timing resistor. When the collector voltage reaches a certain value, the transistor is said to be "ON" and begins to conduct current.

When the device is "OFF", no current flows between the collector-emitter and the base-emitter. As the base-emitter voltage is held at a constant level, the current can only be increased by reducing the collector voltage. This is the purpose of the timing resistor, which provides a variable collector voltage so that the DDTC123YCA-7-F can be adjusted to switch at different frequencies. The timing resistance is adjustable, making it possible to create a wide range of different frequencies.

The DDTC123YCA-7-F is a versatile device, with a wide range of applications. It is commonly used in audio amplifiers, motor controllers, relays, and light dimmers. It is also used in many other applications, such as automotive switches, power supplies, and common collector amplifiers. It is important to note that the device is sensitive to heat and must be used with proper heat sinking and air cooling.

In conclusion, the DDTC123YCA-7-F is a single pre-biased BJT designed for low frequency switching applications. The device uses a biasing principle to control the collector voltage, which allows it to switch at different frequencies. It is commonly used in audio amplifiers, motor controllers, relays, and light dimmers, but can also be used in many other applications. It is important to use the device with proper heat sinking and air cooling to prevent overheating.

The specific data is subject to PDF, and the above content is for reference