SFT14G R0G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SFT14G R0G is a diode rectifier, specifically of the single type. It is comprised of an anode, which is a single monolithic diode, connected to an envelope of glass which acts as a hermetic seal. The SFT14G R0G is defined by its voltage, current and power ratings, which together make it suitable for a variety of applications.

The SFT14G R0G is used in several applications, the two most common being rectification and voltage regulation. In rectification, it is used to rectify AC power, which is created from the input of DC power and vice versa. This conversion is achieved by the diode reversing the current direction in each half cycle of the input voltage, creating a full wave rectified output. The device can also be used in series with a resistor to create a voltage regulator, creating an output voltage that remains constant, regardless of fluctuations in the input voltage.

SFT14G R0G is also used as a clamping diode, switching diode, and freewheeling diode. As a clamping diode, it is used to limit the voltage across a load, forming a simple \'clamp\'. It can also act as a switching diode, allowing current to flow either way through the device, depending on voltage levels across it. In this way, it can act as an electronic switch. Finally, as a freewheeling diode, it is used to reduce or eliminate power losses caused by \'reflected current\'. This occurs when the load is switched off, but current is allowed to remain in the circuit.

The SFT14G R0G\'s working principle is simple. It is based on the diode\'s particular resistive capability. A diode will allow current to flow in one direction but will resist all other types of current flow. This is known as the \'diode effect\'. The SFT14G R0G is a pulsed current device which acts both as a limiter and a low-impedance voltage regulator, allowing current to flow in only one direction and creating full-wave rectification. It is capable of delivering a maximum power rating of 3KV, 0.30A and 180W, making it suitable for a variety of applications, from domestic appliances to industrial equipment.

In conclusion, the SFT14G R0G is a single diode rectifier, capable of providing rectification, voltage regulation and current damping in various scenarios. It features an anode and a resistive envelope of glass which acts as a hermetic seal and is suitable for applications that require up to 3KV, 0.30A and 180W. Its simple working principle is based on the diode effect, the resistance of the device allowing for current to only flow in one direction. With its range of usable applications, it is a reliable and cost-effective rectifier solution.

The specific data is subject to PDF, and the above content is for reference