ZXTN26020DMFTA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The ZXTN26020DMFTA is an NPN transistor, commonly referred to as a Bipolar Junction Transistor (BJT). It has three pins, named Emitter (E), Base (B) and Collector (C). The transistor is suitable for use in a wide range of applications and is the most commonly used type of BJT. The ZXTN26020DMFTA has a low voltage (Vce) rating of 6V and a maximum power dissipation of 240 mW, making it suitable for use in low power applications.

The transistor’s main application field is power conversion. It can be used to convert video signals, audio, digital and analog signals, as well as to control motors, heaters and other equipment. Power transistors are useful in switching circuits due to their high current gains, and they have been used in the past to build radio transmitters and receivers. They are also used in amplifiers and oscillators.

The working principle of an NPN transistor is based on the movements of electrons (negative) and holes (positive). When a current is applied to the base of the transistor, electrons move from the emitter to the collector, and a current is established in the circuit. Thus, the transistor acts as a current switch, allowing or blocking current from passing from the emitter to the collector. The amount of current that is allowed to pass depends on the voltage applied to the base.

The ZXTN26020DMFTA is also commonly used for amplifying signals, as it has a high current gain. When the voltage from an input signal is applied to the base of the transistor, it causes a current to flow from the emitter to the collector, thus amplifying the signal. This type of transistor also provides protection in circuits, as it is capable of shutting off voltage in response to high current. This is useful in protecting circuits from overload and preventing damaging spikes in current.

In conclusion, the ZXTN26020DMFTA is a type of single NPN bipolar junction transistor that is suitable for use in a wide range of applications, such as power conversion, signal amplifying and protection against overvoltage. It has three pins, namely emitter, base and collector, and it works by allowing or blocking current from passing from the emitter to the collector, based on the voltage applied to the base.

The specific data is subject to PDF, and the above content is for reference