BUK7Y9R9-80E/CX

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The BUK7Y9R9-80E/CX is a device used in transistors to manipulate the currents and voltages in circuits. This type of transistor is referred to as a "bipolar junction transistor" (or BJT for short). It is classified in the single transistor category as it has three terminals (collector, base and emitter), and it is mostly used in applications requiring amplification and switching capabilities.

Application Field

The BUK7Y9R9-80E/CX transistor is typically used as an amplifier in circuit designs. It can be used as a current amplifier, voltage amplifier, frequency amplifier or even logic amplifier. The output of the device depends on the inputs and other parameters such as bias current, base-emitter voltage and collector-emitter voltage.

In addition, the BUK7Y9R9-80E/CX transistor is often used as a switch to control the current flow in a circuit. It can be used to control a load, such as a motor, or to control several loads in a series. It can also be used in applications that require high-speed switching capability.

Working Principle

The BUK7Y9R9-80E/CX transistor is an NPN transistor, which means that it has three main components: a collector, an emitter, and a base. The collector is the output, while the emitter and base are the inputs. When a voltage is applied at the base, current flows from the emitter to the collector. The amount of current that flows is determined by the amount of voltage applied at the base. This current flow is called the bias current.

The BUK7Y9R9-80E/CX transistor also has a base-emitter voltage, which determines the amount of current allowed to flow from the collector to the emitter. This voltage is often controlled by a voltage divider circuit. Finally, the transistor also has a collector-emitter voltage, which is applied to the collector and determines the amount of current allowed to flow between the collector and emitter. This voltage can be adjusted using a circuit such as a voltage follower.

The BUK7Y9R9-80E/CX transistor is designed to be used in applications requiring amplification and switching capabilities. In particular, it is useful for operating linear circuit designs, and it can be used as both an amplifier and a switch.

Conclusion

The BUK7Y9R9-80E/CX is a bipolar junction transistor (BJT) that is used to control currents and voltages in circuits. This transistor is classified in the single transistor category and is commonly used as an amplifier or a switch. It has three terminals, which are the collector, base and emitter, and the output of the device depends on the inputs and other parameters such as bias current, base-emitter voltage and collector-emitter voltage. In summary, the BUK7Y9R9-80E/CX transistor is useful for applications requiring amplification and switching capabilities.

The specific data is subject to PDF, and the above content is for reference