DMN6040SVT-7 Discrete Semiconductor Products

Vgs(th) (Max) @ Id:	3V @ 250µA
Package / Case:	SOT-23-6 Thin, TSOT-23-6
Supplier Device Package:	TSOT-26
Mounting Type:	Surface Mount
Operating Temperature:	-55°C ~ 150°C (TJ)
Power Dissipation (Max):	1.2W (Ta)
FET Feature:	--
Input Capacitance (Ciss) (Max) @ Vds:	1287pF @ 25V
Vgs (Max):	±20V
Gate Charge (Qg) (Max) @ Vgs:	22.4nC @ 10V
Series:	--
Rds On (Max) @ Id, Vgs:	44 mOhm @ 4.3A, 10V
Drive Voltage (Max Rds On, Min Rds On):	4.5V, 10V
Current - Continuous Drain (Id) @ 25°C:	5A (Ta)
Drain to Source Voltage (Vdss):	60V
Technology:	MOSFET (Metal Oxide)
FET Type:	N-Channel
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

DMN6040SVT-7 is a single semiconductor switch commonly used in electronics. It is manufactured by Diodes Incorporated and is part of the discrete transistor family. This particular transistor is a field effect transistor (FET) that operates on the switch by applying voltage to the gate. This particular FET has a drain-source voltage rating of 60V and can carry as much as 40A current with a through-hole mounting. This makes the DMN6040SVT-7 a great solution for a variety of applications, such as motor control, lighting control, and signal interface.

How Does a DMN6040SVT-7 Work?

The DMN6040SVT-7 operates differently than a conventional transistor. Instead of being directly driven by current, it is driven by an electrical field. A field effect transistor is a unipolar device, meaning it only has one type of charge carrier. A voltage is applied to the gate, which creates an electric field. This electric field is strong enough to create a channel between the drain and source. This channel allows current to flow from the source to the drain, thus turning the switch on. The path between the source and drain is heavily reliant on the strength of the electric field, so applying higher voltages to the gate can result in higher currents. The amount of current that can flow through a field-effect transistor depends greatly on the gate width between the drain and source. The wider the gap, the higher the current that can flow.

DMN6040SVT-7 Application Field and Working Principle

DMN6040SVT-7 can be used in a variety of electronics applications, most notably motor control and lighting control. Since it can handle high currents and voltage, it is ideal for high power applications. The DMN6040SVT-7 can also be used to control signals on a low power design. It can be used to modulate signals and amplify low-level signals. The DMN6040SVT-7 takes advantage of field effect transistors to allow for increased current carrying capacity and gate control. It is a unipolar switch that can handle current as high as 40A with a drain-source voltage of up to 60V. By applying a voltage to the gate of the DMN6040SVT-7, an electric field is created, which opens a path between the source and drain, allowing current to flow. The electric field strength is directly proportional to the voltage that is applied to the gate, so a higher voltage will result in higher currents. This makes the DMN6040SVT-7 a great solution for high power applications and allows for precise control of signals in low power designs.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description