SI4626ADY-T1-E3

Vgs(th) (Max) @ Id:	2.5V @ 250µA
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Supplier Device Package:	8-SO
Mounting Type:	Surface Mount
Operating Temperature:	-55°C ~ 150°C (TJ)
Power Dissipation (Max):	3W (Ta), 6W (Tc)
FET Feature:	--
Input Capacitance (Ciss) (Max) @ Vds:	5370pF @ 15V
Vgs (Max):	±20V
Gate Charge (Qg) (Max) @ Vgs:	125nC @ 10V
Series:	TrenchFET®
Rds On (Max) @ Id, Vgs:	3.3 mOhm @ 15A, 10V
Drive Voltage (Max Rds On, Min Rds On):	4.5V, 10V
Current - Continuous Drain (Id) @ 25°C:	30A (Tc)
Drain to Source Voltage (Vdss):	30V
Technology:	MOSFET (Metal Oxide)
FET Type:	N-Channel
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The SI4626ADY-T1-E3 is a type of single-gate MOSFET that is used in various applications. It is designed to deliver an output voltage that can range from 0.9 V to 11 V. It can also provide a range of current that can range from 0.35 mA to 5 Amps. The SI4626ADY-T1-E3 can support a wide range of applications, such as power management, audio amplification, and signal conditioning. In this article, the application field and working principle of the SI4626ADY-T1-E3 will be discussed.

Application Field

The SI4626ADY-T1-E3 can be used in a wide range of applications, such as power management, audio amplification, signal conditioning, and more. In power management applications, the SI4626ADY-T1-E3 can be used to regulate the voltage supplied to a system. This is done by controlling the flow of current through the device. The device can be used to control the output of a power supply, which is useful in applications where the voltage needs to be regulated. The device can also be used to control the output of a load, such as a motor, which can help to reduce energy consumption. In audio applications, the SI4626ADY-T1-E3 can be used to amplify a signal. This is achieved by increasing the output voltage of the device, which in turn increases the amplitude of a sound wave. This can be useful in applications where sound must be amplified, such as in loudspeakers and headphones.The SI4626ADY-T1-E3 can also be used for signal conditioning applications. In these applications, the device can be used to filter, amplify, and shape a signal. This can be used to reduce noise and improve the reliability of a signal.

Working Principle

The SI4626ADY-T1-E3 is a single-gate MOSFET that uses a gate terminal to control the flow of current through the device. The gate terminal is connected to an external voltage source, which is used to set a gate voltage that controls the current flow through the device. When a positive voltage is applied to the gate terminal, the device will turn on and current will flow through it. The amount of current that can flow through the device is determined by the size of the gate voltage. The larger the gate voltage, the more current can flow through the device. When a negative voltage is applied to the gate terminal, the device will turn off and no current will flow through it. The device will remain off until the gate voltage is increased to a low enough level that the device turns on again.

Conclusion

The SI4626ADY-T1-E3 is a type of single-gate MOSFET that is used in a wide range of applications. It can be used in power management, audio amplification, and signal conditioning applications. It works by controlling the flow of current through the device using a gate terminal. When a positive voltage is applied to the gate terminal, the device will turn on and current will flow through it. When a negative voltage is applied to the gate terminal, the device will turn off and no current will flow through it.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description