SPB800-BCP1

Serial Interfaces:	UART
Package / Case:	Module
Operating Temperature:	-40°C ~ 85°C
Mounting Type:	Surface Mount
Current - Transmitting:	186mA
Current - Receiving:	77mA
Voltage - Supply:	3 V ~ 3.6 V
Memory Size:	--
Utilized IC / Part:	--
Antenna Type:	Integrated, Chip
Series:	--
Sensitivity:	--
Power - Output:	--
Data Rate:	54Mbps
Frequency:	2.4GHz
Modulation:	16QAM, 64QAM, BPSK, CCK, DBPSK, DQPSK, OFDM
Protocol:	802.11b/g
RF Family/Standard:	WiFi
Part Status:	Active
Packaging:	Tray

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction:An RF Transceiver Module, like SPB800-BCP1, is an electronic module that has both receive and transmit capabilities. It is used in many applications, such as in wireless communication systems, vehicle electronics, and RF remote control devices. This article explains the application field and working principle of the SPB800-BCP1. Application Field: The SPB800-BCP1 is an advanced transceiver module designed for the Iridium 900MHz cellular systems, providing reliable performance under harsh conditions. It is ideal for applications that require high bandwidth, low latency, and low-cost solution. With the SPB800-BCP1 module, customers can easily add-on the additional features that require additional hardware, such as data sensing and data monitoring. The SPB800-BCP1 is a high-performance low-cost solution for a variety of public and private radio communications and remote monitoring applications. It is suitable for fixed and mobile point to point, point to multi-point, and mobile cellular systems. The module is capable of transmitting and receiving in both voice and data mode. It supports multiple data protocols like GPRS, GSM, and CDMA. With its extended frequency coverage of 450MHz – 1000MHz, it can be used to meet the spectrum requirement of various users Types. Working Principle: A Transceiver Module works by sending and receiving signals from antennas via electric waves. The SPB800-BCP1 contains both a receiver and transmitter, allowing it to both receive and transmit radio signals. The module is designed with a dual stage direct conversion architecture for reception and transmission. It contains a low-noise receiver module that can receive signals in the frequency range of 450MHz to 900MHz. The transmitter uses a single-ended Class-E amplifier that can produce RF power up to 2 watts. The module can be operated in a linear or nonlinear mode, allowing the user to choose the best output power for their application. The module also includes a low-noise amplifier and low-noise input filters. The low-noise amplifier provides better signal reception sensitivity compared to conventional transceivers. Conclusion:The SPB800-BCP1 is an RF transceiver module designed for Iridium 900MHz cellular systems. It supports multiple communications protocols and is capable of transmitting and receiving in both voice and data modes. The module can operate in both linear and nonlinear modes, providing the user with the best output power. The module also includes a low-noise amplifier and low-noise input filters, providing better signal reception sensitivity. The SPB800-BCP1 is an ideal solution for applications that require high bandwidth, low latency, and low-cost solution.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description