SPB80N03S2L-06 G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SPB80N03S2L-06G is a N-channel enhancement mode power field effect transistor. It is specifically designed for electronic switching applications such as DC-DC converters, Motor Control, and Home Appliances. This article will focus on the application field and working principle of the SPB80N03S2L-06G.

The SPB80N03S2L-06G is an N-channel enhancement mode MOSFET, which means it can be used to switch an electrical load. The load is connected to the drain terminal, while the source terminal is connected to ground. Since the resistance between the source and drain terminals is low, it can quickly switch a large amount of current. The Gate terminal is connected to a control voltage, which is responsible for switching the FET on or off. When the Gate voltage is positive, the FET is turned on, allowing current to pass through the load. When the Gate voltage is negative, the FET is turned off, preventing current from passing through the load.

The SPB80N03S2L-06G is primarily used for DC-DC converters and motor control applications. In DC-DC converters, the SPB80N03S2L-06G is used to switch the power between the input and output of the converter. This enables the converter to keep the output voltage constant, regardless of changes in the input voltage. In motor control, the SPB80N03S2L-06G is used to switch the power to the motor, which allows it to be turned on or off. This also helps to protect the motor from damage in the event of a short circuit.

The SPB80N03S2L-06G is a great choice for low-power applications, due to its low maximum on-state resistance and low gate threshold voltage. It also has a high breakdown voltage, which makes it ideal for continuous operation in harsh environments.

In addition to being used in low-power applications, the SPB80N03S2L-06G can also be used for high-power switching applications. When using this MOSFET for high-power switching, it is important to note that the maximum drain-to-source voltage must not exceed 100 volts. If the power being switched exceeds this voltage, it is important to use a different MOSFET.

The SPB80N03S2L-06G is a great choice for a variety of applications, as it has a wide range of features. Its low gate threshold voltage and high breakdown voltage make it a good choice for low-power applications, while its maximum drain-to-source voltage make it suitable for high-power switching applications. With its fast switching times and low on-state resistance, it is a great choice for both switching and protection applications.

The specific data is subject to PDF, and the above content is for reference