1N3064_T50R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 1N3064_T50R belongs to a family of diodes known as single rectifiers. These diodes are designed to convert AC current and voltage to DC form, and are commonly used to send power to a load, such as a motor, in a safe and efficient manner. The 1N3064_T50R is a special type of diode known as a fast recovery diode, which is able to switch quickly and recover to its original state even when large amounts of current are running through it. These types of diodes are typically used in circuits that require fast switching of current and voltage, such as motor control applications.

The 1N3064_T50R is a 50V, 800mA device, with a peak forward surge current of 10A. The device is made with a n-doped silicon substrate, with a gold or moisture-resistant lead finish. The total maximum power dissipation of the device is 4W, and the maximum operating junction temperature is 150°C.

The basic working principle of a single rectifier diode is fairly simple. When the diode is connected in a circuit, in either a forward or reverse direction, it behaves as an electrical one-way gate, allowing current to flow only in the forward direction. This is because the forward voltage drop of a diode is much lower than the reverse voltage drop. In a forward-biased diode, current will only flow when the forward voltage drop is greater than the reverse one. In other words, current will only flow when the anode potential is greater than the cathode potential.

To better understand how a single rectifier diode works, it is helpful to consider its symbol in a circuit diagram. A single rectifier diode will typically be symbolized by an arrow pointing from the cathode (negative) terminal to the anode (positive) terminal. This symbol serves to indicate the direction of the current flow when the diode is forward biased. When the diode is reverse biased, however, no current will flow.

The 1N3064_T50R diode is commonly used in many applications that require fast recovery time and high power capability. Its fast recovery time makes it suitable for use in applications that involve sleep modes, active shunts, hard switching, and power management. Its high power capability is ideal for applications such as motor control, reverse battery protection, and in battery chargers.

In conclusion, the 1N3064_T50R is a single rectifier diode that has been designed to provide fast switching and high power capability. It is primarily used in applications where fast recovery time and high power capability are required. It is a 50V, 800mA device with a peak forward surge current of 10A and a maximum operating junction temperature of 150°C.

The specific data is subject to PDF, and the above content is for reference