2SD2444KT146R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

2SD2444KT146R is a single bipolar junction transistor (BJT) with a total power dissipation of 150 W and a maximum voltage rating of 300 V. It is a low-noise, high-gain device, with a maximum collector-emitter voltage (Vce) of 10V and a maximum gain of 6 dB. The 2SD2444KT146R is a transistor suitable for a wide range of applications and is commonly used in RF amplifier and audio circuits.

The 2SD2444KT146R is typically used as an NPN transistor, with the collector connected to the source terminal, the base connected to the gate, and the emitter connected to the drain terminal. This design allows current to flow from the collector to the emitter when the base is biased by a positive voltage. The current flow can be adjusted by varying the voltage applied to the base.

The operating principle of the 2SD2444KT146R lies in the fact that it is a voltage controlled current source. When the voltage applied to the base is higher than a certain voltage (Vce), the transistor turns on, allowing a certain amount of current (Ic) to flow from collector to emitter. The current flow can be adjusted by increasing or decreasing the applied voltage. This makes the 2SD2444KT146R ideal for use in amplifier circuits, where the gain of the amplifier is controlled by adjusting the voltage applied to the base of the transistor.

2SD2444KT146R can also be used in audio circuits as a pre-amplification amplifier. When used in this way, the base voltage is adjusted in order to change the amplification level. The current passing through the transistor is also adjusted in order to control the tone of the audio output. 2SD2444KT146R can also be used for low-noise, high-gain amplifiers, as well as for RF amplifiers.

The 2SD2444KT146R is an excellent choice for use in power supply circuits. It can be used to regulate the current flow from the power source to the load. The base voltage applied to the transistor is adjusted in order to determine the amount of current that can pass through it. This allows for precise control over the voltage and current being supplied to a load.

The 2SD2444KT146R is also a good choice for use in low-noise, high-gain radio frequency amplifier circuits. By adjusting the base voltage, the transistor can be used to amplify weak signals while allowing signals with high frequencies to pass through without much distortion. This makes it ideal for use in radio receivers and transmitters.

The 2SD2444KT146R is a versatile transistor suitable for many applications. With its wide range of capabilities, it can be used for a variety of tasks including amplifier and audio circuits, power supply circuits, radio frequency amplifiers, and more. The 2SD2444KT146R is an excellent choice for those looking for a reliable and versatile transistor.

The specific data is subject to PDF, and the above content is for reference