BD13810S

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The BD13810S is a low-power NPN silicon transistor designed for use in power amplifiers. It is a type of bipolar junction transistor (BJT). This transistor is usually used for general-purpose amplification and switching applications.

The BD13810S consists of three terminals – emitter (E), base (B) and collector (C). The current passing through these terminals is determined by the voltage applied at the base. If a smaller voltage is applied to the base, it allows current to flow from the emitter to the collector. As the base voltage increases, the electrons flowing from the emitter to the collector decreases.

In the BD13810S, the operating voltage range should be between 1.0 and 10 volts. The collector current should range from 0.5 to 2 amperes single pulse. The maximum power dissipation should be less than 25 watts.

The main application field of this transistor is in amplifiers and switching circuits. It can be used to switch the current on and off in electronic circuits. It can be used in the input stage of an amplifier circuit to strengthen the signal before it is passed to the next stage. It is also used in power amplifiers to increase the output power of the signal.

When using the BD13810S, there are a few safety measures that should be followed. Always make sure that the input voltage is within the operating voltage range (1.0 to 10 volts). Also, make sure that the maximum power dissipation should not exceed 25 watts. In addition, it is important to check the base voltage before applying the power to the circuit.

The working principle of the BD13810S is based on the fact that it is a type of bipolar junction transistor. The base-emitter junction behaves like a diode and can be used to control the current flow from the emitter to the collector. The current is controlled by the voltage applied at the base terminal. If the voltage at the base is low, the current will flow from the emitter to the collector. As the base voltage increases, the current decreases.

The BD13810S is a useful device for many applications where power amplifiers and switching are required. Its simple design and low power requirement makes it an ideal choice for such applications. Its compact size also allows it to be used in smaller circuits. With its many features, this transistor can be used in various types of circuits, providing reliable performance in all applications.

The specific data is subject to PDF, and the above content is for reference