BD13910S

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The BD13910S is a single bipolar junction transistor (BJT) engineering with a breakdown voltage of 40V and a collector current of 1A. This product is well suited to a wide range of applications, especially where a low cost and reliable bipolar transistor are required. It is also ideal for power switching applications. The BD13910S can be used in a variety of applications such as:

• Low voltage/low power stereo audio amplifiers
• Small-signal amplification
• Mobile phones
• Home appliances
• Lighting dimmers
• Motor speed controllers

The working principle of the BD13910S is simple: it consists of two PN type semiconductor junctions (bipolar junction). One of the junctions is known as an emitter and the other is known as a collector. The emitter-collector junction is sensitive to current, and can be used to amplify small signals or efficiently switch current on and off. When current is applied to the base, the collector current increases or decreases, depending on the polarity of the applied current.

The operation of the BD13910S is based on two key principles. The first is that the size of the base current, relative to the size of the collector current, determines the gain of the transistor’s amplifier circuit, and the second is that the transistor can be used to control the flow of current, either in forward or reverse directions.

The BD13910S has three terminals, the source (emitter), the drain (collector) and the gate (base). When a voltage is applied to the gate, a ‘base current’ will flow through the device; this current is what controls the transistor’s state. The base current will flow from the source to the drain, resulting in either a direct current or alternating current dependant on the type of application.

The output from the collector will vary depending on the current flowing through the base and the amount of current that is being applied. If the base current is higher than the collector current, no current will flow and the output from the collector will be zero. Conversely, if the base current is lower than the collector current, then current will flow, and the output from the collector will be equal to the base current.

The most common application for the BD13910S is in power switching and low-voltage audio amplifiers, as it is suitable for both direct-current and alternating-current applications. The device can be used to switch lights, motors, and other power loads, and can also be used as an audio amplifier in car stereos and portable audio devices.

The BD13910S is an extremely versatile and reliable component, and it is suitable for a wide range of low and high voltage applications. It is relatively low cost, making it a favourable choice for power switching and audio amplification applications. Furthermore, its ability to handle high operating temperatures makes it an excellent choice for temperature-sensitive applications.

The specific data is subject to PDF, and the above content is for reference