BUK9C07-65BIT,118

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The BUK9C07-65BIT Transistor is a single bipolar-junction transistor (BJT). It is widely used in various consumer electronics, toys and other devices. The most common application it is used for is as an amplifier, but they are also widely used as switches, voltage regulators and as oscillators. This transistor is also widely used in high-power applications.

The BUK9C07-65BIT Transistor is based on the PNP structure. It use a negative voltage in order to drive current through the Base-Emitter junction. When the transistor is switched on, it can drive current from the Collector to the Emitter, allowing for an amplification of voltage and current. The transistor also requires a proper bias voltage in the Base in order for it to work effectively.

The BUK9C07-65BIT Transistor is capable of both low and high current output. It is rated at 65 volts and a collector current of 150mA. It has a transition frequency of 350MHz, a collector cut off current of 70mA and a power dissipation of 1.3W. The transistor has a gain-bandwidth product of 700MHz.

The BUK9C07-65BIT Transistor can be used in a variety of applications such as audio amplifiers, power amplifiers, RF amplifiers, switching circuits and DC-DC converters. It has been used in a range of consumer electronic products such as phones, TVs, games consoles, DVD players and other portable devices.

It can also be used in high-power applications such as motor drivers, robotics, industrial lighting and as a switch in communications systems. Generally, it is used as an amplifier, switch, or voltage regulator in these applications. The BJT of this transistor can also be used as an oscillator or in frequency multipliers.

The working principle of the BUK9C07-65BIT Transistor is based on the PNP structure. It has Base, Collector, and Emitter pins and the Collector current is controlled by the current going into the Base pin. When a voltage is applied to the Base pin, it attracts electrons and fills the Base region. These electrons then travel through the Base-Emitter junction and into the Collector, creating a current.

In order to ensure the transistor works correctly, the Base voltage must be between zero and the Collector voltage. If the Base voltage is too low, the transistor will be switched off and will not conduct current; if too high, the transistor will saturate and conduct current without limitation. The gain of the transistor is dependent on the size of the Base region.

To further increase the transistor’s performance, a negative voltage can be used in the Base pin to create what is known as a trigger voltage. This trigger voltage will cause current to flow from the Base to the Collector and will allow for strong amplification. It also increases the speed of the response and allows for more stable operation.

Overall, the BUK9C07-65BIT Transistor is a powerful and versatile single bipolar-junction transistor (BJT). It is widely used in consumer electronics, toys and other devices, as well as in high-power applications. It can be used as an amplifier, switch, voltage regulator, oscillator, or frequency multiplier, depending on the application.

The specific data is subject to PDF, and the above content is for reference