IXGP42N30C3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The IXGP42N30C3 is a high-speed, low gate charge N-channel field-stop IGBT (insulated-gate bipolar transistor). It is part of an extended family of IXYS IGBTs specifically designed for applications requiring high speed switching and total gate charge including: Uninterruptible Power Supply (UPS) systems, motor speed control, adjustable frequency drives, audio amplifiers, and welding machines among others.

The IXGP42N30C3 parts are suitable for operation in the temperature range from -55oC to 150oC. Its higher switching speed allows better optimization of the system through the use of fewer inductive elements and smaller capacitive filters, resulting in greater system efficiency. This device has a low gate charge and a low dynamic (switching) loss, making it ideal for UPS applications where short circuit immunity is a requirement.

The IXGP42N30C3 is actually a combination of two individual components. The first component is the insulated-gate bipolar transistor (IGBT) which serves a dual purpose in electronics. It can be used to control an electrical current in a circuit by acting as a switch. It can also act as an amplifier, amplifying electrical signals in the circuit. The second component is a Schottky-clamped diode (SCD), which is used to protect the circuit against inductive kick back.

The working principle of the IXGP42N30C3 is based on the unique properties of the IGBT. It uses a gate-controlled switching action instead of a transistor\'s traditional base-controlled switching action. This is because the IGBT switches faster and has a higher voltage-laden output, making it ideal for faster switching operations. The SCD, on the other hand, is used to protect the circuit from counter-electromotive forces, which would otherwise occur after the IGBT is turned off. This combination of IGBT and SCD makes the IXGP42N30C3 an excellent choice for circuits that require fast and efficient switching.

The IXGP42N30C3 has been tested extensively in various applications such as DC/AC converters, inverters, and speed controllers. In addition, the device is being used in various power systems, such as solar inverters, 6‐pulse inverters, switch mode power supplies and three‐phase motor controllers. The IXGP42N30C3 has also been used in audio and harmonic filters, quality AC power supplies, and commercial consumer-grade power systems.

The IXGP42N30C3 is a single IGBT and, as such, its main purpose is to provide an efficient and reliable switching action in order to control the current. The IXGP42N30C3 offers lower gate charge, higher switch frequency, and a lower level of device losses compared to the more traditional N-Type IGBTs. The device is rated at a maximum current of 42A and a maximum collector-emitter voltage of 1200V, and is capable of switching frequencies up to 100kHz.

In conclusion, the IXGP42N30C3 is a single IGBT that offers high switching speeds and total gate charge. It has been tested extensively in various applications and is suitable for operation within a wide range of temperatures. The IXGP42N30C3’s combination of IGBT and SCD makes it an ideal choice for applications requiring fast and efficient switching. Further, the low gate charge and lower level of device losses make this device a viable solution for smaller systems, such as audio and harmonic filters, quality AC power supplies, and commercial consumer-grade power systems.

The specific data is subject to PDF, and the above content is for reference