BLF7G22LS-250P,112

Series:	--
Packaging:	Tube
Part Status:	Active
Transistor Type:	LDMOS (Dual), Common Source
Frequency:	2.11GHz ~ 2.17GHz
Gain:	18.5dB
Voltage - Test:	28V
Current Rating:	65A
Noise Figure:	--
Current - Test:	1.9A
Power - Output:	70W
Voltage - Rated:	65V
Package / Case:	SOT539B
Supplier Device Package:	SOT539B
Base Part Number:	BLF7G22

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

BLF7G22LS-250P,112 application field and working principle

Introduction of RF MOSFET BLF7G22LS-250P,112

RF MOSFET BLF7G22LS-250P,112 (also known as Mixer Dual-gate FET) is a two-port device that combines two field-effect transistors (FETs). It contains two independent gates (inputs) and a single output. Each gate of the device controls the drain current of the device. Its unique operating characteristics simplify the design of complex frequency conversion networks, make them more efficient, smaller and much less power than traditional circuits. It is widely used in Frequency conversion, frequency multiplication, switching and linear amplification.

Application fields of RF MOSFET BLF7G22LS-250P,112

RF MOSFET BLF7G22LS-250P,112 has applications in many industries including radio frequency (RF) and microwave systems. The BLF7G22LS-250P,112 is primarily used in frequency conversion, frequency multiplication, switching and linear amplification.In frequency conversion and frequency multiplication, the BLF7G22LS-250P,112 is used to shift a signal between two frequencies, and multiple frequencies can be shifted simultaneously. This is achieved by using the two independent gates to modulate the drain current. The two gates can be used for either up-conversion or down-conversion of the signal.The RF MOSFET BLF7G22LS-250P,112 can also be used in switching and linear amplification applications. This allows for a wide range of power handling capabilities. For example, the RF MOSFET can be used in switching applications such as RF detectors, switches, multiplexers, and solid-state relays. In linear amplification applications, the BLF7G22LS-250P,112 is used to boost or reduce the power of an incoming signal.

Working principles of RF MOSFET BLF7G22LS-250P,112

The RF MOSFET BLF7G22LS-250P,112 works by combining two separate FETs. The two FETs are connected to a single drain and output, but the two FETs each have their own gate. This allows for an independent control of the drain current from each gate.The two gates of the RF MOSFET BLF7G22LS-250P,112 are used to modulate the drain current. This drain current is then used to shift the frequency of the input signal. The two gates can be used for either up-conversion or down-conversion of a signal. On the other hand, in linear amplification and switching applications, the two gates are used to adjust the current or voltage given to the load.When the two gates are operated in parallel with a given current, the drain current is modulated. This modulation results in a frequency shift of the output signal. Thus, the RF MOSFET BLF7G22LS-250P,112 can be used in various frequency conversion applications such as frequency conversion, frequency multiplication, and frequency division.

Conclusion

In conclusion, the RF MOSFET BLF7G22LS-250P,112 is a two-port device that combines two field-effect transistors (FETs). It is mainly used in frequency conversion, frequency multiplication, switching and linear amplification. It works by combining two FETs and modulating the drain current through the two independent gates. The BLF7G22LS-250P,112 is a versatile device that is used in various industries such as radio frequency and microwave systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description