JANTXV1N6620US

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are semiconductor devices that act as a medium for the flow of current in one direction only, acting as a resistor to the opposing direction. Rectifiers are diodes that are utilized for alternating to direct current conversion and for voltage waveform smoothing. Single rectifiers typically provide a higher amount of current than their dual counterparts without the complexity of utilizing both sides of a rectifier.

The JANTXV1N6620US is a single rectifier made with a stud gate, glass passivated junction semiconductor, and is manufactured to the highest industry and military standards. This rectifier provides 500 V peak repetitive reverse voltage blocking capability and is suitable for use in general and military grade, molded-in-place applications. Capable of providing 20 A of continuous forward current, this rectifier also has a low leakage current at 88 μA for maximum efficiency.

The JANTXV1N6620US exhibits a number of features such as a high surge capacity, fast processing capabilities for maximum power, low power losses that are especially beneficial for energy saving, a low forward voltage drop of 1.3 V for maximum efficiency, and a low thermal resistance of 1.2 °C/W. This specific rectifier also has a low leakage, reverse recovery time of <15 ns and a reverse recovery time of <10 μs.

The multiple features of the JANTXV1N6620US make it an excellent fit for many uses in applications such as AC/DC converters, switch mode power supplies, automotive electronics, bridge rectifiers, network power supply, and other circuits that require the aforementioned characteristics. In addition, the reliable and rugged construction of this rectifier gives piece of mind knowing that the device can handle rigorous conditions. The rectifier meets the military requirements of MIL-PRF-19500/554 and is RoHS/REACh Compliant.

The working principle of a rectifier is rather simple; an alternating current is applied across a two terminal device and the current is blocked in one direction, causing it to flow only in one way and thus converting the current from an AC signal to a DC signal. The two terminals in a rectifier do not switch but remain constant, either negative or positive throughout the signal, effectively blocking the alternating signal by letting current to only pass through in one direction.

A single rectifier is of utmost importance to AC/DC conversion as well as voltage waveform smoothing. Referred to as a half-wave rectifier, this device is capable of providing high current levels while offering less complexity and cost compared to dual rectifiers. When using the JANTXV1N6620US, AC signals are rectified to half of their amplitude and through subsequent full-wave rectification and smoothing, DC signals are provided.

Ultimately, the JANTXV1N6620US is the ideal rectifier for multiple applications due to its useful features and its ability to provide an excellent cost to performance ratio and maximum efficiency. Its reliability and ruggedness make this rectifier a safe bet for many industry or military-grade uses, due to its compatibility with MIL-PRF-19500/554 standards.

The specific data is subject to PDF, and the above content is for reference