NJVMJD45H11D3T4G

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Transistor Type:	PNP
Current - Collector (Ic) (Max):	8A
Voltage - Collector Emitter Breakdown (Max):	80V
Vce Saturation (Max) @ Ib, Ic:	1V @ 400mA, 8A
Current - Collector Cutoff (Max):	1µA
DC Current Gain (hFE) (Min) @ Ic, Vce:	40 @ 4A, 1V
Power - Max:	20W
Frequency - Transition:	90MHz
Operating Temperature:	-55°C ~ 150°C (TJ)
Mounting Type:	Surface Mount
Package / Case:	TO-252-3, DPak (2 Leads + Tab), SC-63
Supplier Device Package:	DPAK

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

NJVMJD45H11D3T4G is a single bipolar transistor (BJT). This type of transistors is a three-terminal device based on semiconductor materials that are designed to amplify or switch electronic signals and electrical power.

Application Field

The NJVMJD45H11D3T4G is used in a variety of applications, including electric guitars, portable radios, television sets, and audio amplifiers. It can also be used in switches, programmable logic controllers (PLCs), and motor drives. In addition to its wide range of uses, the transistor is able to provide high gain and low noise, making it useful for numerous applications. Furthermore, its relatively small size and robust design make it ideal for applications in areas that require extended reliability. From computers to signals to displays, transistors like the NJVMJD45H11D3T4G can be used in almost any situation that requires electric signals. The transistor is also used in many automotive and military applications due to its power and speed.

Working Principle

The NJVMJD45H11D3T4G transistor has three main terminals, namely the emitter, base, and collector. When the base voltage is applied, a current is induced into the emitter-base junction. This current ultimately causes an increase in the conduction within the collector-base junction, leading to a current flowing from the collector to the emitter (or from the emitter to the collector, depending on the configuration). When the transistor is functioning as an amplifier, the current flowing from the collector to the emitter is an amplified version of the current that was originally drawn from the base. This amplified current is then sent to the connected device in order to provide power or control signals. When the transistor is functioning as a switch, the current applied to the base controls the amount of current flowing between the collector and emitter. When the current is high, the transistor is switched on, while when the current is low, the transistor is switched off.

Conclusion

The NJVMJD45H11D3T4G transistor is a single bipolar transistor with a wide range of uses in applications requiring high gain, robust design, and low noise. It has three terminals, namely the emitter, collector, and base, and works by drawing current from the base, which is then amplified by the collector-base junction and sent to the connected device. Additionally, the current applied to the base can be used to switch on or off the transistor, making it a useful device for numerous application fields.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description