PDTD113ZQAZ

Series:	Automotive, AEC-Q101
Packaging:	Tape & Reel (TR)
Part Status:	Active
Transistor Type:	NPN - Pre-Biased
Current - Collector (Ic) (Max):	500mA
Voltage - Collector Emitter Breakdown (Max):	50V
Resistor - Base (R1):	1 kOhms
Resistor - Emitter Base (R2):	10 kOhms
DC Current Gain (hFE) (Min) @ Ic, Vce:	70 @ 50mA, 5V
Vce Saturation (Max) @ Ib, Ic:	100mV @ 2.5mA, 50mA
Current - Collector Cutoff (Max):	500nA
Frequency - Transition:	210MHz
Power - Max:	325mW
Mounting Type:	Surface Mount
Package / Case:	3-XDFN Exposed Pad
Supplier Device Package:	DFN1010D-3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

PDTD113ZQAZ, commonly known as pre-biased bipolar transistor single (BJT), is an integrated circuit device used worldwide. It is popularly used in power management, motor controls, automotive applications, robotics, lighting control and industrial control. This type of device is primarily intended for use in inverters, switches, converter and interfacing circuits, current sources, bridges, couplers, amplifiers, waveform or logic circuits. Its design makes it suitable as a low profile, low noise, cost effective solution for high power applications.

Applications

The main applications of PDTD113ZQAZ include:

• Power managementUPS, switching regulators, DC-AC inverters, pulse width modulation (PWM) control, battery chargers, etc.
• Motor controlControl of solenoid/servo/brushless DC motors, AC/DC hydraulic drive control, etc.
• AutomotiveAutomotive lighting, fuel injectors, ABS, OBD, etc.
• RoboticsControl of robotic arms, legs, robotic vision systems, etc.
• Lighting ControlLighting dimmers, lighting timer, sensors, etc.
• Industrial ControlControl of industrial machines, sensors, etc.

Working Principle

PDTD113ZQAZ is a pre-biased bipolar transistor single (BJT) which means that its output current is already balanced and predetermined by its design. This type of device has an electrical output with an off-state voltage between the collector and base terminal, a small reverse bias between the base and the emitter terminal, and a maximum reverse leakage current between the collector and the base. There are two main components inside the PDTD113ZQAZ: the NPN and PNP transistor. These devices amplify signals electrically by regulating the current flow between the collector and emitter. The collector is the component that allows current to flow when the base is provided with the right voltage. The output voltage is proportional to the input voltage.The PNP transistor works in the same way, except it uses the opposite of the NPN transistor. That is, the current flows from the collector to the emitter. The main advantage of these types of transistors is that they can change their output from a low signal level to a high signal level with a small change in the input signal. They are also highly reliable and are used in many applications that require a high level of reliability and flexibility.

Conclusion

PDTD113ZQAZ is a popular pre-biased bipolar transistor single (BJT) integrated circuit device used in a wide variety of applications. Its design makes it suitable as a low profile, low noise, cost effective solution for high power applications. It is highly reliable, electrically efficient and able to amplify signals electrically by regulating current flow between its collector and emitter. The PDTD113ZQAZ is an invaluable component used in many applications such as power management, motor control, automotive, robotics, lighting control and industrial control. It is a vital part in the smooth operation of these applications and continues to be a reliable solution in many versions of these applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description