RN1910FE(T5L,F,T)

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Transistor Type:	2 NPN - Pre-Biased (Dual)
Current - Collector (Ic) (Max):	100mA
Voltage - Collector Emitter Breakdown (Max):	50V
Resistor - Base (R1):	4.7 kOhms
Resistor - Emitter Base (R2):	--
DC Current Gain (hFE) (Min) @ Ic, Vce:	120 @ 1mA, 5V
Vce Saturation (Max) @ Ib, Ic:	300mV @ 250µA, 5mA
Current - Collector Cutoff (Max):	100nA (ICBO)
Frequency - Transition:	250MHz
Power - Max:	100mW
Mounting Type:	Surface Mount
Package / Case:	SOT-563, SOT-666
Supplier Device Package:	ES6

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to the RN1910FE(T5L,F,T)

The RN1910FE(T5L,F,T) is a Bipolar (BJT) - Arrays, Pre-Biased transistor designed to be used in wide variety of applications. It is designed to provide high-speed switching, high output current capability, and very low on/off resistance to enable faster switching and lower power consumption. This type of transistor is also used to control base resistance, base current, and voltage ratings.

Application Field and Working Principle

The RN1910FE(T5L,F,T) is most commonly found in applications such as power conversion, audio, voltage regulators, and automotive. The transistor is capable of controlling the switching of different types of circuit elements based on the input voltage. When the input voltage is below the threshold voltage, the transistor is off and no current flows through the circuit. When the voltage surpasses the threshold voltage, the transistor is on and begins to conduct current from the collector to the emitter. The device can also be used for other applications such as controlling the power supply for microcontrollers, providing switching for relay drivers, and controlling the current between two different circuits. In a nutshell, the operating principle of the RN1910FE(T5L,F,T) works by allowing electrons to flow from the emitter to the collector when a particular voltage is applied to the base of the transistor. The voltage changes across the base and the emitter will then determine the current flow through the transistor.Other applications that the RN1910FE(T5L,F,T) can be used for are audio amplifiers, switching circuits, and DC-DC power converters. For its use in audio applications, the device can be used to control the volume of the sound. It can also be used in switching power supplies, allowing it to control the current over long distances with minimal loss. Lastly, it is often used in DC-DC power converters to help regulate the output current by switching off when the output exceeds the corresponding input voltage level. In general, the RN1910FE(T5L,F,T) is an effective and reliable device for applications that require fast switching, high output current capability, and low on/off resistance. It can be used for applications such as power conversion, audio, voltage regulators, and automotive.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description