STF202-22T1G Filters

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

EMI/RFI Filters (LC, RC Networks) are critical components of today’s circuitry and the STF202-22T1G Filter is one example of an especially versatile type of filter.They are used to prevent electronic equipment from interfering with each other, as well as from being affected by external interference. By limiting the propagation of both electrical noise and electromagnetic interference, EMI/RFI Filters play a critical role in ensuring that signals are not corrupted by external sources of interference.The STF202-22T1G is an EMI filter with two terminal, two layer capacitors that provide LC and RC type filtering of transient noise, and can cover the entire frequency range from 200Hz up to 1.2GHz.By including both LC and RC filters the STF202-22T1G provides a comprehensive solution to EMI and RFI line noise. These filters also function as reliable shunts that absorb the spikes and transients that can result from processes such as transients in motors, appliances, and other power supply network operations.The STF202-22T1G is designed to attenuate transients and keep ground-noise to extremely low levels. This makes it especially useful in applications such as board edge protection, microprocessor blocking, and motorized appliances, as it can prevent the introduction of spurious signals which could interfere with the device it is attached to.The STF202-22T1G is able to filter two terminal conductors, and can be used in a wide variety of applications. It is available in 0.2uF and 0.4uF versions with maximum working voltages of 600V and 1,200V respectively.The working principle of the STF202-22T1G is simple and effective: the two-layer capacitor, composed of a dielectric layer and an electrode, stores energy during the transient surge, thereby providing a protective barrier against large voltage swings. This electrodynamic barrier is designed to quickly reduce the amplitude of the transients to a level that does not interfere with other circuitry or affect their performance.The two electrodes of the STF202-22T1G are connected to a conductor that carries the signal around the filter. These two terminals are connected to the source and to the load, which allows the filter to protect the device against large amplitude, high frequency transients.In order to ensure that the filter is able to work effectively at high frequencies, it is necessary to provide a low source impedance. This means that the source component must be able to generate a low impedance signal, as this will reduce the amount of interference that is able to propagate through it. Another important factor is to ensure that the filter terminals are connected in the correct order. This is important as it ensures that the filter will work as intended, reducing the propagation of the transient noise.Overall, the STF202-22T1G is a reliable, cost effective EMI/RFI filter, with a wide range of applications, which is designed to protect against transient noise and limit the propagation of electrical noise and electromagnetic interference. It is an extremely versatile and effective solution to the problem of eliminating electrical interference, and can be used to greatly reduce the risks of spurious signals affecting the performance of an electronic device.

The specific data is subject to PDF, and the above content is for reference