2N7002 TR13

Vgs(th) (Max) @ Id:	2.5V @ 250µA
Package / Case:	TO-236-3, SC-59, SOT-23-3
Supplier Device Package:	SOT-23
Mounting Type:	Surface Mount
Operating Temperature:	-65°C ~ 150°C (TJ)
Power Dissipation (Max):	350mW (Ta)
FET Feature:	--
Input Capacitance (Ciss) (Max) @ Vds:	50pF @ 25V
Vgs (Max):	40V
Gate Charge (Qg) (Max) @ Vgs:	0.59nC @ 4.5V
Series:	--
Rds On (Max) @ Id, Vgs:	7.5 Ohm @ 500mA, 10V
Drive Voltage (Max Rds On, Min Rds On):	5V, 10V
Current - Continuous Drain (Id) @ 25°C:	115mA (Tc)
Drain to Source Voltage (Vdss):	60V
Technology:	MOSFET (Metal Oxide)
FET Type:	N-Channel
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

2N7002 TR13 Application Field and Working PrincipleN7002 TR13 is a type of Field Effect Transistor (FET) with a single switching element. It is designed to operate as an electronic switch in low-frequency power sources. This type of transistor is most commonly used in switching circuits where low power voltage is necessary. It can also be used to control circuits in digital, logic, and data processing circuits.The 2N7002 TR13 is designed to work at low frequencies and enables a level of control that is useful in a variety of applications. Due to its low power features and ability to switch off quickly, it is especially suited for applications that require fast response time and power efficiency.A 2N7002 TR13 is composed of two semiconductor layers. The upper layer is a semiconductor layer with a high gate current and an integrated protection diode. The lower layer is an insulating gate layer which keeps the gate current from propagating to other components in the circuit. The upper layer acts as the control gate and the lower layer acts as the drain region. A 2N7002 TR13 works by changing the conductivity of the drain region when subjected to an applied gate voltage. The gate voltage can be applied from the external source or from the internal integrated protection diode. When set, the gate voltage allows current flow from the source to the drain region and the resulting current is then available to the external circuit.The transistor works as an electronic switch and is mainly used in digital circuit and logic circuit. When the gate voltage is applied, it allows current flow from the source to the drain and the resulting current is available for the external circuit for further circuit processing. This can be used in logic circuits to, for example, switch from an input signal to a corresponding output signal. A 2N7002 TR13 also can be used to switch current from a higher voltage level to a lower voltage level. This can be done by increasing the current flow in the transistor further to enable the device to draw out more current from the source. This operation is called voltage level shifting and is a useful technique in power supply design. The 2N7002 TR13 can also be used in amplification applications to increase the signal amplitude of input devices. This is done by using the transistor as a voltage controlled amplifier, which works by controlling the gain of the signal by controlling the voltage applied to the gate.Overall, the 2N7002 TR13 is a useful Field Effect Transistor (FET) with a single switching element. Its low power consumption and fast response time makes it suitable for a wide range of applications including switching circuits, digital, logic and data processing circuits and for voltage level shifting and amplification.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description