MAGX-000025-150000

Series:	--
Packaging:	Bulk
Part Status:	Obsolete
Transistor Type:	HEMT
Frequency:	1.2GHz ~ 1.4GHz
Gain:	18dB
Voltage - Test:	50V
Current Rating:	5.5A
Noise Figure:	--
Current - Test:	600mA
Power - Output:	170W
Voltage - Rated:	65V
Package / Case:	--
Supplier Device Package:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The MAGX-000025-150000 is a dual active bridge (DAB) motor driver integrated circuit (IC) which uses FET technology. This IC is designed specifically for motor applications that require high speed, high reliability and low power consumption. It consists of two power stages and two logic stages, each of which can be used independently or together as a complete system. The MAGX-000025-150000 is rated for up to 15 A continuous drive current and can be used for both open-loop and closed-loop systems.

Application

The MAGX-000025-150000 is used in a wide range of applications from automotive, industrial, and medical to wearable electronics and robotics. In automotive applications, the IC is used to drive DC brushed motor actuators in electric parking brakes and other applications. In industrial applications, the IC can control DC brushless motor drivers for precision motion control systems. It is also used in medical applications such as prosthesis and robotic-assisted surgery. In wearables, the IC is used to operate components such as barcode scanners, RFID readers, and gyroscopes. Finally, it is also used in hobby robotics for controlling motors in remote-controlled (RC) vehicles.

Construction

The MAGX-000025-150000 has four separate ICs inside: one for the positive power stage, one for the negative power stage, one for the positive logic stage, and one for the negative logic stage. Each IC has a control logic unit for control and ADCs for the input signals. On the logic side, the IC is designed to be used with an external Microcontroller or logic processor, and is capable of managing multiple peripherals such as I2C bus and CANbus communication. It also has an integrated clock-oscillator circuit that provides a stable clock frequency for the system.

Working principle

The MAGX-000025-150000 works by converting logic control signals into actuation signals, which cause the motor to turn. It takes in two control signals: one for the positive power stage and one for the negative power stage. The control signal is then processed by the IC, which generates the respective high and low side gate drive signals. These signals are then fed to the power stage, which also consists of two FETs - a P-channel FET and an N-channel FET. The P-channel FET controls the current flow through the motor in the positive direction, and the N-channel FET controls the current flow in the negative direction.

Conclusion

The MAGX-000025-150000 is an integrated circuit (IC) with four separate ICs inside which offers a cost-efficient and reliable solution for motor control applications. It takes in two control signals and processes them to generate the respective high and low side gate drive signals. These signals are then used to drive the two power FETs, thereby controlling the current flow to the motor. The MAGX-000025-150000 is designed for use with open-loop and closed-loop systems, and can be used in a wide range of applications, including automotive, industrial, medical, and hobby robotics.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description