STH290N4F6-6

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The STH290N4F6-6 is a highly common transistor that is found in a wide range of electronic applications. It is a type of MOSFET, or metal-oxide semiconductor field-effect transistor. MOSFETs are used to control the flow of power between two or more components, like a switch. The STH290N4F6-6 is a single MOSFET and is routinely used in applications such as amplifiers, power supplies, switching circuits, motor drives, and more.

Physical Design and Features

The STH290N4F6-6 is a four-pin Dual Source Dual Drain (DSDD) type MOSFET with an on-state resistance of 5.6 Ω, drain-source breakdown voltage of 29V and drain-source Voltage RDS (on) of 5.6V. The package size is an ultra-small 3.3mm × 3.3mm and a height of 0.9mm. The pins are arranged on the transistor in the following order: Source, Gate, Drain and Drain. The number in the name refers to the drain-source current quality of 290A, or the maximum amount of current the device can carry when fully powered.

The Working Principle of the STH290N4F6-6

At its most basic, the STH290N4F6-6 is a simple switch. When an electrical signal is applied to the gate, the transistor responds by creating an electrical connection between the source and the drain, allowing current to flow. The amount of current flow can be adjusted by increasing or decreasing the amount of electrical signal sent to the gate. The higher the signal, the more current flows, and vice verse. This makes MOSFETs a great choice for controlling large amounts of power, as the amount of current can easily be adjusted depending on the needs of the application.

Typical Applications

The STH290N4F6-6 is commonly used for switching high-power applications, such as the power supply for consumer electronics, including laptop chargers and power adaptors. It can also be used in amplifiers, current sources, voltage sources, and other complementary circuits. In addition to power control, MOSFETs provide advantages such as faster switching and higher efficiency than traditional transistors. The STH290N4F6-6 is also ideal for high-frequency applications, as it is capable of switching fast enough to minimize signal distortion.

Additional Considerations

When using the STH290N4F6-6 for high-power application, it is important to consider the power dissipation rating. This rating is the maximum amount of heat the device can dissipate without suffering from permanent damage. An excessively high dissipation rating can cause the device to fail prematurely, so it is important to select a transistor capable of handling the power requirements of the specific application. Additionally, it is important to select the right MOSFET for the job. The STH290N4F6-6 is a good choice for many applications, but depending on the application and its power requirements, another MOSFET may be better suited.

The specific data is subject to PDF, and the above content is for reference