MCH6448-TL-H

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MCH6448-TL-H is a Single N-Channel MOSFET (Metal Oxide Field Effect Transistor) with a 25 V drain-source rating and a 3.2 Amp current at 25°C. It is designed for a variety of applications ranging from logic level shifting to analog switching.

The MCH6448-TL-H is a voltage-controlled transistor. Unlike normal transistors that are current-controlled, MOSFETs are used to open and close electrical circuits after the gate voltage is varied so as to produce an output. It can be used for various purposes such as switching, for load driving, for amplifying, in analog circuits and for powering small motors.

It offers fast switch times, low on-resistance, and high efficiency due to its low power dissipation. Its features also include reverse polarity protection, current reduction when used beyond its specified limits, and thermal runaway prevention. Its major components include the gate, drain, and source electrodes. The gate is where the control voltage is applied and the drain and source electrodes are the output elements.

The MCH6448-TL-H works by allowing current (aka electrons) to flow through the channel. When a gate-source voltage (aka bias voltage) is applied, a field effect is created which attracts and traps electrons from the source into the channel. Thorough this channel, electrons are then allowed to flow from the source to the drain. The gate can then be used to adjust the amount of current flowing through the channel and, thus, the amount of current flowing from source to drain.

In short, the MCH6448-TL-H is designed for a variety of switching applications, from logic level shifting to analog switching. It offers fast switching times, low on-resistance, and high efficiency due to its low power dissipation features. The MCH6448-TL-H works by allowing current to flow through the channel when a gate-source voltage is applied. By adjusting the gate voltage, the amount of current flowing through the channel, and thus the amount of current flowing from source to drain, can be adjusted.

The specific data is subject to PDF, and the above content is for reference