APT50M38JLL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The APT50M38JLL is a single-feedback field-effect transistor (FET) that is used in various applications to control current switching. Being a single transistor, it is the smallest and simplest type of FET in the market.

FETs are semiconductor devices that are composed of a semiconductor channel with terminals for current control and output. These terminals are the gate, the source and the drain. The gate terminal controls the expression of the current in the channel, which is simply known as the “on” state. When current flows from the source to the drain, the “on” state is established. Depending on the type of FET, the “on” state occurs when a certain voltage is applied to the gate terminal or when a current flows through the gate terminal.

MOSFETs are the most common type of FETs used in modern electronics. They are used for a variety of different applications and most are found in integrated circuits. MOSFETs differ from other FETs in two important ways. First, they don\'t require a large amount of current to turn on, thus limiting the amount of heat generated. Second, they more closely resemble a solid-state switch, allowing for more accurate control of current than other types of FETs.

The APT50M38JLL is a single-feedback FET that is specifically designed for high-power switching applications. It features an operating voltage range of 40-1800V, a drain to source (D-S) breakdown voltage of 4500V and a maximum current rating of 4.5A. It is marked with an abbreviation that stands for Single Field effect transistor (SFET)

The APT50M38JLL is commonly used in applications such as motor control, DC-DC converters and power switching. This type of FET is also used in power supply units, where it simplifies the design of a dc circuit while reducing the number of parts and space needed.

In terms of its working principle, the APT50M38JLL is a current-controlled device that is triggered by a voltage on the gate terminal. When a voltage is applied to the gate, an electric field is created which control the flow of current from the source to the drain. The current flow is regulated and depends on the resistance between the source and drain.

In conclusion, the APT50M38JLL is a single-feedback FET that is used for high power switching applications. It features an operating voltage range of 40-1800V, a D-S breakdown voltage of 4500V and a maximum current rating of 4.5A. It is triggered by a voltage on the gate terminal and its current flow is regulated by the resistance between the source and drain.

The specific data is subject to PDF, and the above content is for reference