FDS6875

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

FDS6875 is a type of integrated field-effect transistor (FET) array. It is composed of four N-channel enhancement-mode FETs, making it suitable for a variety of applications. FDS6875 is a low-noise, low-cost, and high-efficiency device that can be used for a variety of power switching and signal control applications. FDS6875’s quick-on and quick-off features make it ideal for interfacing with microcontrollers and other circuitry that requires fast response times.

The FDS6875 array consists of four individual FETs, each with its own gate, drain, and source. Each FET is rated at a maximum voltage of 12 V, peak current of 25 A, and total gate charge of around 10 mA. The FDS6875 is available in both SOT-89 and SOFT packages, allowing it to be used with a wide variety of circuit boards and mounting configurations. FDS6875 can be used in a variety of applications, including:

Power Supply Applications: FDS6875 can be used as a high-efficiency switch for power supply designs, allowing a single supply to be used for both the positive and negative rails. The high current handling and low loss characteristics of FDS6875 makes it an ideal choice for AC/DC power converters, switching regulators, and power supplies.

High-side and Low-side Switching: FDS6875 can be used in high-side and low-side switching applications. In high-side applications, the drain of each FET is connected to the positive rail, and the source is connected to the load. This allows the FETs to switch the load on or off. In low-side applications, the source is connected to ground, and the drain is connected to the load.

Signal Control: FDS6875 can be used as a signal control switch, allowing signals to be routed to multiple locations. FDS6875 is ideal for these applications due to its low noise and low power consumption. FDS6875 can be used to switch between multiple signals, as well as provide multiple signals to a single location.

Motor Control:FDS6875 can be used as a motor control switch, allowing motor control signals to be routed through multiple FETs. The FETs can be connected in either parallel or series, depending on the application. FDS6875 is ideal for controlling the current and voltage used in motor control applications.

Working Principle: The working principle of the FDS6875 is based on the field-effect transistor (FET). A FET is a three-terminal switching device, with a control terminal (gate), a source terminal (drain), and a drain terminal (source). An applied voltage to the gate terminal causes a channel to form between the source and drain terminals, allowing current to flow. By varying the voltage of the gate terminal, the current through the channel can be controlled. The FET can be used for switching or amplification applications.

FDS6875 provides a four-channel FET array, with each channel having its own gate, source, and drain. The device is low-noise and low-cost, with a high efficiency. It is ideal for power switching, signal control, motor control, and other applications.

The specific data is subject to PDF, and the above content is for reference