IXFT150N17T2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The IXFT150N17T2 is a single N-channel bridge field-effect transistor (FET) with a drive voltage of 17V. Withstanding up to 2.5A, the device is perfectly suited for medium power applications. It boasts an avalanche characteristic that helps prevent overshoot in load voltage, making it suitable in applications where a stable power-supply is desired. The device also offers current source capability, allowing it to the used in voltage-limiting circuits for over-voltage protection.

Since IXFT150N17T2 is a single N-channel FET, its operation is based on the principle of current support. This means that the FET is active only when a gate voltage is applied, and it will be disabled when the gate voltage is removed. The amount of current that is allowed to flow through the FET’s channel is determined by the gate voltage. At low gate voltages, the current flowing through the channel is limited by the FET’s threshold voltage. At higher gate voltages, the current depends on the relationship between the gate voltage and the drain-source voltage.

The primary applications of the IXFT150N17T2 are in static AC power sources, full-bridge drivers, DC-DC converters, uninterruptible power supply (UPS) systems, load switches, motor control, and AC/DC adapters. The device’s low on-resistance and low on-voltage make it ideal for switching small loads, such as LEDs. It is also suitable for large loads, such as high-lift motors, by offering efficiencies greater than 99%.

In static power sources, the IXFT150N17T2 is used as a switch to control the flow of power between two separate power sources. It allows for the conversion of alternating current (AC) to direct current (DC) power. It can also be used for rectification, allowing for the conversion of DC power to AC. The device’s low on-resistance and low on-voltage make it well suited for these types of applications. It also helps reduce the size and power consumption of the power supply.

In full-bridge drivers, the IXFT150N17T2 is used to drive the high-side and low-side transistors that form the bridge. In this application, the low on-resistance of the IXFT150N17T2 helps reduce the power loss and allows for the high-speed switching. It is also well suited for use in load switches, motor control, and AC/DC adapters, helping to reduce power consumption and improve efficiency.

The IXFT150N17T2 is a versatile single N-channel FET that is well suited for medium power applications. With its low on-resistance and low on-voltage, it is perfectly suited for switching small and large loads. Its avalanche characteristic helps prevent overshoot in load voltage. The device is used in static AC power sources, full-bridge drivers, DC-DC converters, uninterruptible power supply systems, load switches, motor control, and AC/DC adapters. Its high-speed switching capability combined with its low on-resistance makes it well suited for high-power applications.

The specific data is subject to PDF, and the above content is for reference